composites的例句大全

The ECI is feasible to prepare rapidly fiber-reinforced metal matrix composites at room temperature.

证实了ECI在室温下快速制备纤维增强金属基复合材料的可行性.

Ceramic micro-and nano-composites are discussed in detail, and functionally gradient materials . ( FGM ) are also briefly described.

重点介绍了微米和 纳米复合材料, 并简单介绍了功能梯度材料 ( FGM ).

The XRD results depicted that the LSM-LSC composites remained good structure compatibility after fired at 1200� � C.

结果表明这两种钙钛矿阴极材料的复合物具有很好的结构相容性.

The XRD results depicted that the LSM-LSC composites remained good structure compatibility after fired at 1200� � C.

结果表明这两种钙钛矿阴极材料的复合物具有很好的结构相容性.

The material design is the first problem to be solved in the process of developing the ceramic matrix composites.

在陶瓷基复合材料研制过程中，材料设计是必须首先解决的问题。

Gradient silicon carbide coatings were prepared on the surface of C/ C composites by chemical vapor reaction ( CVR). Formation mechanism and oxidation resistance property of the coating were discussed.

本文采用化学气相反应法（CVR）制备了C/C复合材料的梯度SiC涂层，对该梯度涂层的形成机理及抗氧化性能进行了试验研究。

The aluminum matrix composites with TiB 2 reinforcement are manufactured by squeeze-cast method.

采用挤压铸造方法制备了TiB2增强铝基复合材料.

Study on PCL/ Carbon Black Conductive Composites with Electro-induced Shape Memory Effect

电致形状记忆聚己内酯/炭黑复合导电高分子材料的研究

The fracture behaviour of the fused quartz particulate composites was investigated.

本文研究了熔融石英颗粒复合材料的力学行为.

The paper introduces all kinds of excellent performances of ECPE ( extended chain polyethylene) fiber reinforced composites, emphasizes their applications in body armour, helmet. armoured vehicle, tank liner, helicopter armour and load-earring member, etc.

概述伸直链聚乙烯纤维增强复合材料的优良性能，着重介绍了它在人体装甲、头盔、装甲车辆、坦克内衬、直升机装甲及承力构件等领域中的应用。

Research of Compressive Strength of Carbon Fiber Cement-matrix Composites ( CFCC) during Freeze-thaw Cycling

碳纤维-水泥基复合材料冻融抗压强度的研究

We also did research on the reinforced mechanism and the fabrication characteristics of the FCMC. The experiment showed that the temperatures and the fiber proportions influenced great on the compressive strength, bending strength, volume density and the porosity of the composites.

实验结果表明，烧成温度和纤维含量对复合材料的耐压强度、抗折强度、体积密度和气孔率影响较大。

The design principle of preform structure and the formation technology of three kind of preform are included for carbon-carbon composites nozzle exit cone ( CCEC), the influence of the preform structure upon the properties of CCEC is also discussed.

介绍了喷管炭/炭材料出口锥（CCEC）预制体结构的设计原则、3种预制体成型技术，并简要讨论了预制体结构对炭/炭出口锥材料性能的影响。

In addition, wear of dental composites is a major issue.

此外, 树脂磨损也是个重要原因.

The characteristics of the microstructure and the strength properties of aluminum matrix composites reinforced with γ Al 2O 3 long fibre, δ Al 2O 3 chopped fibre or SiC particulate by die casting infiltration technique was studied.

报道了压铸浸渗法生产的γAl2O3长纤维、δAl2O3短纤维和SiC颗粒强化铝基复合材料的组织特征和强度性能检测结果。

Study on the Interface of BeCu/ Ni Composites

BeCu／Ni复合材料的界面研究

The practical research confirmed the availability of MCCFs on improving the microwave absorption and mechanical properties of WHF/ VMQ composites.

通过实用化研究证明了磁性纤维在改善铁氧体/甲基乙烯基硅橡胶复合材料的吸波性能以及力学性能方面的有效性。

Behavior of Thermal Fatigue Resistance of WCp/ Fe Ni Steel Matrix Composites

WCp/Fe-Ni钢基复合材料的抗热疲劳特性

WCu composites have been used widely in the fields of electrical materials 、 electron 、 war industry and spaceflight due to their high strength and hardness, good electrical and erosion resistance.

W-Cu复合材料具有良好的导电性、抗熔焊性和高强度、高硬度等优点，目前在电工材料、电子、军工、航天等领域有着广泛的应用。

After liquid phase sintering, the WCu composites have been deformed by hot hydrostatic extrusion and subsequent hot extrusion, during which the plastic deformation of tungsten particle is not obvious.

通过对W-40wt%Cu液相烧结坯进行一次热静液挤压和后续的热挤压变形的实验，发现钨铜材料在一次挤压和二次挤压后，其钨颗粒并没有明显的大的塑性变形。