composites的例句大全

And proper content of nano-Al 2 O 3 could improve dielectric breakdown strength of these composites.

适量纳米Al2O3可以提高材料的电击穿强度.

To satisfy these requirements, high dielectric constant composites attract more and more attentions.

这就要求人们不断研究和制备高介电常数复合材料.

The solution and aging behaviors of the composites are analyzed through effective diffusivity theoretical equation.

用有效扩散理论分析了颗粒增强复合材料的固溶时效特性。

Due to the excellent mechanical properties, in-situ ferrous matrix composites can be used in as-cast condition.

由于力学性能优良, 原位铁基复合材料可在铸态下直接应用.

Study on Chemical Reactions Between Metal and Carbon in Carbon/ Carbon Composites Containing Refractory Metal Distribution in Statistics of Wear Rate Data of Refractory Metal Carbide Coatings

混杂难熔金属C/C复合材料中金属与碳反应初步研究难熔金属碳化物覆层磨损率的统计分布

The Synthesis of Monofunctional Polyhedral Oligomeric Silsesquioxane and the Preparation and Characterization of POSS/ Epoxy Composites

含阴离子官能团物质与蒙脱土的相互作用研究单官能团倍半硅氧烷的合成及POSS/环氧复合材料的制备与表征

Summary on Mechanical Property Database of Domestic Carbon Fiber Composites

国产碳纤维复合材料力学性能数据库概述

The dispersing organic bentonites are the basic materials of preparation clay/ polymer nano-composites. Its parity between property and price is superior to compound nano powder materials. It is the study subject of preparation and application of composite material at present.

分散性有机膨润土是制备粘土/聚合物纳米复合材料的基础原料，其性能/价格比明显优于合成纳米粉体材料，是目前复合材料制备和应用领域的研究热点。

In this paper, the erosion test of three kinds of Filon composites in different chemical reagents is studied, and the corrosion resistance of these materials is compared.

本文通过三种Filon板在不同介质中的腐蚀试验，比较了它们的耐腐蚀性能，指出它们适合于不同的使用场合。

Comparison of corrosion resistance for Filon Composites

Filon板耐腐蚀性能的比较研究

Formation and Micro-Crystallization of In-Situ Bulk Amorphous ( ZrCuAl) AgY Alloy Composites SYNTHESIS OF PLASTIC Zr-BASED BULK METALLIC GLASS WITH CRYSTAL PHASE BY DIRECTIONAL SOLIDIFICATION

原位反应（ZrCuAl）AgY块体非晶复合材料的形成与微晶化机制研究定向凝固制备内生晶体增塑的锆基非晶复合材料

In this paper, the crystallization mechanism of synthesizing nanocrystal titanic in liquid media at low temperature is reviewed in detail. Formation and Micro-Crystallization of In-Situ Bulk Amorphous ( ZrCuAl) AgY Alloy Composites

详细介绍了晶态纳米二氧化钛低温液相合成的晶化机制。原位反应（ZrCuAl）AgY块体非晶复合材料的形成与微晶化机制研究

Internal Oxidation Kinetics and Recrystallization of Al_2O_ ( 3p)/ Cu Composites

Al2O3弥散强化铜内氧化动力学及其再结晶研究

Study on the Aging Hardening Behavior of Nano Al_2O_ ( 3P)/ 6061 Composites

纳米Al2O（3P）/6061铝基复合材料时效硬化特性的研究

Effect of particle size and morphology on microstructure and properties of Al_2O_ ( 3p)/ Al composites

Al2O（3p）/Al复合材料中颗粒粒径与形态对组织和性能的影响

Current status and outlook of in situ discontinuously reinforced titanium matrix composites

原位自生非连续增强钛基复合材料的研究现状与展望

Particle-dispersed is a mostly-used method to fabricate ceramic composites.

颗粒弥散增强复相陶瓷是经常使用的材料复合方法.

Carbon/ Carbon ( C/ C) composites are regarded as the most promising heat-resistant materials for long-playing structures at ultra-high temperature and have important strategic value to the national defense.

碳/碳（C/C）复合材料被认为是最有发展前景的超高温长时间使用的热结构材料，具有重要的国防战略价值。

A forming process for preparing high density crystalline ceramic matrix composites was suggested.

为制备高致密度晶态陶瓷基体复合材料推荐了一种成型工艺和一种制备过程.

This isothermal crystallization kinetics of PP/ talc composites was treated using Avrami equation and the effect of talc on the crystallization activation energy was treated using Kissinger equation.

用Avrami方程全面分析PP/滑石粉的等温结晶动力学，并由此获得相关的动力学参数；用Kissinger方程研究滑石粉对PP/滑石粉复合材料结晶活化能的影响。