corrosion的例句大全

Based on the analysis, corresponding measures including retarding plate corrosion, improving scraper, fastening stand fire main, adding rust-resisting valve and auto-sewerage are introduced in detail.

提出了延缓罐底板腐蚀、改造刮板、固定消防立管、增设除渣阀、安装自动排水装置等具体改进措施。

The environmental difference between city gas pipeline and long distance gas pipeline is compared, the limitations of current methods for measuring the soil resistance rate, and the possibility of judging bacterial corrosion are analyzed, and some appropriate improvement measures are put forward.

比较了城镇燃气输配管道与长输管道的周边环境的差别，分析了现行的测取土壤电阻率和判断细菌腐蚀可能性的方法的局限性，提出了相应的改进措施。

The identified mechanisms of bacterial corrosion are essentially important physico-chemical modifications of the medium in contact with the material.

生物腐蚀的机理对金属接触的介质物化调整来讲是非常重要的。

Bacterial corrosion mechanism in drinking water pipelines

给水管道细菌腐蚀机理

Breakthrough progress in research of pipeline bacterial corrosion getting in America

管道细菌腐蚀研究在美获突破性进展

Present study shows that addition a small amount of A1, Ni, etc, to the Cu-Zn alloy for condenser tules enhances the combined corrosion resistance markedly, These new alloys can be used in maritime power-station or for cooling water of unfavorable quality.

结果表明，在铜锌合金中，加入少量的铝和镍，可较明显地提高原合金的综合耐腐蚀性能，能在沿海电站、或不良的淡水水质条件下使用。

Pollution and corrosion of facing stone materials during processing and operating will result in disease and shortened service time.

饰面石材在加工和使用过程中，会受到多种污染和腐蚀产生病害，使寿命缩短。

Analysis of stress corrosion during forced cooling of hot rolled coil

热轧钢卷强制冷却中的应力腐蚀分析

To avoid early steel corrosion and expensive repair measures within the intended service life of reinforced concrete structures several concepts for durability design have been developed in recent years.

为了避免早期的钢筋锈蚀和高昂的维修费用，针对耐久性设计的许多观点在近几年内已经开始发展。

Epoxy asphalt concrete with good properties of high strength, high rigi-ty, antifatigue and corrosion resistance is extensively abroad used for bridge surface pavement, road surface wearing Layer and traffic parking station, etc, and application process is more maturity.

环氧沥青混凝土具有强度高、刚度大、耐疲劳、耐腐蚀等许多优良特性，国外广泛应用于桥面铺装、路面磨耗层、公交停车站等场所，技术已趋成熟。

According to the different industries, the requirements for epoxy curing agents are not the same. Excellent performance of the epoxy curing agent can make the cured product has good stability, high heat resistance and corrosion resistance effect.

根据各行业的不同需求，对环氧树脂固化剂的要求也不尽相同。性能优良的环氧树脂固化剂可以使得固化产物具有稳定性好、耐热性高、抗腐蚀效果好等特点。

The influence of α-Al2O3 micropowder additions on permanent linear change, apparent porosity, cold crushing strength and slag resistance of MgO-Al2O3 based castable is studied in this paper. By EDAX analysis, the mechanism of slag corrosion is investigated.

研究α-Al2O3微粉加入量对钢包渣线用镁铝质浇注料线变化率、显气孔率、耐压强度和抗渣性能的影响，借助EDAX分析，探讨了浇注料的渣蚀机理。

The stainless steels and high nickel corrosion resistant alloys are critical engineering materials.

不锈钢和高镍耐蚀合金是重要的耐蚀材料。

Crevice Corrosion of Stainless Steel Seal Surface in Acetic Acid and Countermeasures

不锈钢密封面在醋酸中的缝隙腐蚀及对策

Influence of iron as alloying element on crevice corrosion behavior of titanium

合金元素铁对钛缝隙腐蚀性能的影响

However, due to the precipitation of chromium nitrides in the nitrided case, conventional plasma nitriding usually deteriorate in corrosion resistance, which is unacceptable in many application situations involving severe corrosive attack by the environment.

然而由于氮化铬在氮化层中沉淀析出，在许多受环境严重腐蚀的应用场合，使传统的离子氮化耐腐蚀性能恶化，这是无法接受的。

Hot dip zinc/ aluminum-plating is one of the most economic and effective protecting technologies in steels' corrosion protection in natural environment currently. However, molten zinc/ aluminum has strong corrosive nature on related equipments.

热浸镀锌／铝技术是目前防止钢铁材料在自然环境中腐蚀的最经济有效的防护技术之一，但熔融锌／铝液对热镀设备具有强烈的腐蚀作用。

Function of Garlic Juice as Corrosion Inhibitor in Oilfield Corrosive Medium

大蒜汁在油田腐蚀介质中的缓蚀作用

Stress corrosion fractures often occurred in piping with defects in corrosive medium.

在严重的腐蚀介质中，压力管道等含缺陷构件常常易于发生应力腐蚀脆性断裂。

The scanning photos show that magnesium alloys for corrosive pitting corrosion types in 3.5% NaCl solution.

由扫描照片的结果可知，镁合金在3.5%NaCl溶液中的腐蚀类型为点蚀。