cross-section的例句大全

Numerical study on the fire stability of the axial-compression cross-section column of reinforced concrete

钢筋混凝土十字形轴压柱耐火性能的数值模拟研究

The experimental results showed that both the circumferential and axial stresses around the cross section varied in a similar "W" shape, but the former was larger than the latter in absolute valume.

实验结果表明，弯头横截面上的环向应力和轴向应力分布均呈相似的W型，但各点环向应力的绝对值均大于轴向应力。

Cross reference should be made to the receipts in numerical sequence and entered in the "Receipt" column in Section I.

为方便参照悢见，收据上应注明编号，并填譝在I部「收据」一栏。

The application of calculation theory of the strength of normal cross section of RC structure

钢筋混凝土结构正截面强度计算理论的应用

Calculation of Normal Cross Section Strength of a Bridge Strengthened with External Prestressing

体外预应力加固桥梁正截面强度的计算

The comparison of bearing capacity of normal cross section between SRC and RC special-shaped columns

两种不同混凝土异形柱正截面极限承载力的比较

The normal cross section M φ curve of the round ended piers of reinforced concrete bridge was determined by finite element method.

应用有限条法，对圆端形桥墩正截面弯矩-曲率（Mφ）关系曲线进行计算。

Comparing the original design, Check the results of Flexural Performance of safety reserves and crack resistance of normal cross section, diagonal cracking performance before and after optimization.

对比原设计验算结果，分析优化前后结构抗弯性能安全储备及正截面抗裂性能、斜截面抗裂性能。

Some useful conclusions on the cross section design of the submerged floating tunnel in the Jintang strait were gained by three-dimensional analysis and segmental model experimental investigation, and a few helpful advice on the concept design of the submerged floating tunnel in the Jintang strait was presented.

通过空间分析和节段模型试验得到了对金塘海峡水下悬浮隧道截面设计有益的一些结论，对金塘海峡水下悬浮隧道概念设计方案提出了一些有益的建议。

Analysis of and research on methods of radar cross section computation

雷达散射截面计算方法分析与研究

Method of Laser Radar Cross Section Measuring with Atmosphere Condition Changing

大气条件变化时的激光雷达散射截面测量方法

Study on Prediction Techniques of Radar Cross Section of Complex Targets

复杂目标雷达截面计算方法研究

The Methods for theoretical Analysis of Radar Cross Section

雷达截面的理论分析方法

Bending and Torsion Analysis of Thin Wall Curved Bar with Closed Cross Section

闭口薄壁曲杆的弯扭分析

Study on tube settler of square cross section with cut angle

关于缺角正方形斜管的研究

Aimed at ungraded network carbon compound in heavy cross-section bearing steel occur during the cooling process of being cooled, which is caused by slow cooling speed, simulation experiment was carried on to study rolled metal clipped from field by using of home-made equipment in the lab.

针对大端面轴承钢在轧后冷却过程中由于冷速过慢引起碳化物网状不合问题，利用实验室自制设备，对从现场剪取的轧材进行了模拟实验研究。

Application and computation of compound cross section in combined sewer

复式断面在合流管渠中的应用与计算

The roof structure of the hall 8 of Shanghai New International Expo Center is composed of 16 spatial fish-bellied steel trusses, whose span is 72m. Due to the diamond cross section, the stiffness of the trusses is weaker.

上海新国际博览中心8馆的屋盖结构由16榀跨度为72m的鱼腹式空间钢桁架组成。

Open Cross-Section Beams Under Pure Bending ⅱ. Finite Element Simulation

纯弯曲开口横截面梁的有限元模拟分析

Using finite element method for 16 frame-supported continuous masonry walls composed with the normal law, the paper presentes a simple method of calculating bending moment of control cross section of joists based on Matlab.

通过按正交设计的16榀框支墙梁的有限元结果分析，采用Matlab程序回归得出了托梁控制截面弯矩计算的简单公式，可以供设计者参考。