error的例句大全

Thus the allowable error of area measurement was setted.

确定出该仪器量测图形面积时的容许误差；

All the testing results of the three modules meet design requirements within the range of allowable error.

测试结果表明，在误差范围内，模块均满足设计要求。

Frame Synchronization and Allowable Error Analysis

帧同步及其容错分析

It is necessary to decide a reasonable sampling volume within a limit of allowable error.

因此，在允许接受的误差范围内，有必要确定最合理的采样体积。

The accuracy between the predicted and actual times was in the allowable error range of engineering.

预测的滑坡时间与实际的滑坡时间的误差在工程允许精度之内。

The Wedge Error Compensation Technology Used in the Double Sides Mask Aligner

一种应用于双面光刻机中的楔形误差补偿技术

An automatic turning devices is designed, reducing installation error when the grinding plate is trued and dressed, which improves the machining accuracy.

设计了能够在研磨机床上拆卸的车削装置，减少了研磨盘修整后的安装误差，有利于提高钢球的加工效率和精度。

The effect of the surface albedo is considered secondly as an error correction so as to obtain the net solar radiation at various surface albedos.

然后将地表反射率的影响作为误差项进行订正，从而得到各种地表反射率条件下的晴天地表太阳净辐射的计算方法。

Error Analysis of Airburst Grenade of Shipborne Gun Firing Against the Sea Targets

舰炮使用空炸榴弹对海射击误差分析

The performance analysis of space-time codes based on pair-wise error probability

基于成对错误概率的空时编码性能分析

Loading stage model can be simplified for second-order large inertial system, which respond slowly; During no-load phase, the system respond quickly, but with large steady-state error.

加载阶段模型可化简为大惯性二阶系统，系统响应缓慢；空载阶段，系统响应迅速，但存在较大的稳态误差。

One of the modern air engagement, active radar guided air to air missile weapon system's target acquisition ability suffers from error factors.

误差是影响主动雷达型中远距空空导弹武器系统截获性能的重要因素。

Analysis of orientation error of vitrified porcelain tile side-grinding and angle-cutting machine tool

瓷质墙地砖磨边倒角机定位误差分析

To improve the accuracy of digital MTF ( modulation transfer function) measurement system, two auto-focus evaluation methods ( acutance function method and mean square error function method) are introduced.

为了提高数字式光学传递函数测量的精确度，介绍了2种自动对焦评价方法：锐度函数法和均方差函数法。

Different from part measurement on real CMM, the result of measurement is not whether the actual dimension and error is satisfied, but it is the measurement strategy and measurement program of specified part.

与真实环境下坐标测量机的零件测量不同，它产生的测量结果并不是零件的实际尺寸及误差是否满足要求，而是产生特定被测零件的测量程序和测量方案。

A new method is proposed for error correction and the accuracy of measuring is improved.

在物体测量中，分析了重建和测量误差，提出了一种纠错处理算法，提高了物体的测量精度。

The higher accuracy of measuring the Doppler frequencies, the less error of the aperture distribution.

多普勒频率的测频精度愈高，反演口径分布的误差愈小。

On the premise of analysis of the factors that influence the accuracy of position fixing, an error model of the azimuth and elevation measurement is built up by Taylor launch.

在分析影响定位精度因素前提下，采用合理的假定建立测向交会定位算法的误差分析模型；

Analysis of the Error of Surveying Acceleration of Gravity by Simple Pendulum

单摆测重力加速度误差分析

The Recursive Identification Algorithm of the Minimum Absolute Error Sum Regression

最小绝对误差和回归的递推辨识算法