extruder的例句大全

The article studied that maleic anhydride ( MAH ) grafted polypropylene ( PP ) in one pair of screw extruder.

在双螺杆挤出机上研制马来酸酐(MAH ) 接枝的聚丙烯 ( PP ).

The latest development state and research hotspot of co-extrusion equipment were introduced. Especially, the Conex extruder researched in abroad and new type ZX extruder researching in China which could be applied for multilayer products were introduced.

介绍共挤出设备的发展趋势和研发热点，重点介绍可实现多层结构单机共挤的新设备&国外的Conex挤出机和国内正在研究的ZX新型挤出机。

The Design of Twin-Screw Extruder Die for Special-shaped Profile Extruder and Its Application

挤出异型材用双螺杆挤塑机机头模具的设计挤扩支盘成型机及其应用

Taking the development of the extruder die for a typical complex profile rubber sealing strip as an example, the designing method and basic thought for the extruder die were introduced.

本文以一典型异型密封条挤出模头的研制为例，详细介绍了组合式异型密封条挤出模头的设计方法及基本思路。

The auger of the extruder adopts abrasion-resistance metal powder spray-painting technology.

螺旋挤出机的采用 耐磨 耐金属粉末喷漆技术.

This production line includes mainframe extruder, screen changer, mould, vane, lambdoidal board haul-off units, and winder.

该机组主要由主机 、 换网器 、 模具 、 风环、牵引机 、 人字板 、 收卷机等组成.

The extrusion propulsion mechanism of the granulating extruder adopts the extrusion propulsion screw rod.

所述造粒挤出机的挤出推进机构是采用的挤出推进螺杆.

Production capacity: refers to the largest extruder extrusion amount per unit time.

生产能力: 指挤出机单位时间最大挤出量.

This shear equipment and the sheet die were successively linked to forepart of the single-screw extruder.

可控剪切专用装置和片材成型口模依次联接在挤出机前端.

Disposes the parallel double screw extruder, is suitable specially for the profile squeezes out high speed.

配置平行双螺杆挤出机, 特别适用于型材高速挤出.

Dynamic-vulcanization PP composites were prepared with twin-screw extruder and dynamic-vulcanization technology.

用双螺杆挤出机和动态硫化技术制备出了综合力学性能好、熔体强度高的聚丙烯复合材料.

This line includes mainframe extruder, screen changer, mould, water ring, lambdoidal board haul-off units, and winder.

该机组主要由主机 、 换网器 、 模具 、 水环 、 牵引机、人字板 、 收卷机等组成.

Meanwhile introduced the development of the auxiliary equipment of extruder from the temperature control device 、 feeding device and head side pressing device, and explained the development trend of extrusion equipment from 3 aspects of application extending 、 train and new product.

同时从温控装置、喂料装置和机头测压装置介绍了挤出机辅属装置的发展情况，并从用途扩展、联动线以及新产品开发3个方面阐述了挤出设备的发展方向。

The extruder-type pulper with a twin-screw is applicable to non-wood fiber raw materials.

双螺杆磨浆机对于 非 木材纤维原料有较好的适应性.

Therefore, pilot study on the simulation system of conical twin-screw extruder has practical and historic significance.

因此, 开展锥形双螺杆挤出过程仿真系统的初步研究具有重要的现实意义和历史意义.

The measurment of rheological properties by slit ( capillary ) die on extruder exhibits some obviousadvantages over other rheometers.

与一般常用的流变仪相比,在挤出机上用狭缝或 毛细管 口模测试高聚物的流变性能有很多优点,例如可同时适合于测定材料的粘性和弹性、测试装置简单,并且测试过程与实际生产过程比较一致.

Production lines include extruder. vacuum inspirtation. shape mould. traction. rewinder and waste material rewinder. etc.

制品生产线由挤出机. 真空吸气. 成型. 牵引. 成品收卷及边料收卷等部分组成.

SJ series single extruder is general and professional equipment for various kinds of material.

SJ系列单挤出一般和专业设备,用于各种材料.

With a windowed twin screw extruder the authors conduct several visualization extrusion experiments.

在可视化双螺杆挤出实验的基础上,阐述了熔融过程中物料运动的多样性问题.

Bell& Evans tenders, sold raw, are subjected to one quick frying to set the breading, instead of Applegate's complete oven cooking. There's no extruder.

Bell&Evans的鸡块是生的，只经过快速油炸来完成裹粉，而不像Applegate一样用烤箱烤熟，而且也不用挤压机。