fabricated的例句大全

XLPE insulated pre-fabricated branch cable has good thermal stability and ageing resistance.

型预制分支电缆具有优良的热稳定性和抗老化性。

We do our best to fabricate each product ; also each product is well fabricated.

加工羽毛鸟,树皮鸟,蝴蝶,蜂鸟,白鸽,蜻蜒,密蜂等,栩栩如生, 精雕细琢.

Bismuth oxide thin films have been successfully fabricated on the stainless steel substrates by using pulsed laser deposition method for the first time.

首次采用355nm脉冲激光沉积在不锈钢基片上制备了氧化铋薄膜。

CW visible vertical cavity surface emitting laser ( VCSEL) operated at room temperature is fabricated by four time proton bombardment technology using tungsten wires as a mask.

利用钨丝掩膜质子轰击工艺制造出一种室温条件下可连续工作的可见光垂直腔面发射激光器。

Mechanism and Reliability of Lead Free Joints Fabricated by Low Temperature Ultrasonic Bonding

无铅焊点低温超声互连的机理及可靠性研究

The fiber directional coupler with branching ratio of 1/ 1~ 1/ 30 has been fabricated.

做出了分光比在1/1～1/30之间变化的光纤定向耦合器。

The nanometer tin powders were prepared by DC arc plasma evaporation a self-designed and fabricated apparatus.

采用高纯锡,通过 自行 设计的直流电弧等离子体蒸发设备制备了纯净的纳米锡粉.

The wear resisting composite of cemented carbide-steel 45 is fabricated by using casting-in process.

采用镶铸工艺制备了硬质合金-45钢双金属复合耐磨材料.

The taper VR dragline bucket is a fully fabricated bucket, designed around the same principle of specific service intervals in which critical areas are replaced during the life of the bucket.

锥形VR拉斗铲铲斗也是全组合型铲斗，铲斗的关键部位根据同一原理按设计的特定维修周期更换。

The SiC/ Al laminated graded composites were fabricated by vacuum hot-pressure method, and the effective joining among the composites of different volume fraction of SiC particles was realized by heat diffusion pressure.

用真空热压法制备了SiC Al层状梯度复合材料；采用热压扩散工艺，实现了不同SiC含量的复合材料间的有效连接。

The interlayer of laminated plastic articles was fabricated by using polyurethane as cast material cast-in-place process.

以聚氨酯(PU) 为浇铸料,用就地灌注的工艺制造层合玻璃中间层.

Based on these researches, the whole system for hot test is fabricated.

在此基础上，加工组装了用于热测实验的整体实验装置。

An Aluminum Gate 100-Element CCD Analog Delay Line Fabricated by Use of Lift-off Technic

采用剥离技术的铝栅100位CCD模拟延迟线

An aluminum gate 100-element CCD analog delay line has been fabricated using a lift-off technique employing an auxiliary poly-Si layer.

本文提出一种以多晶硅为辅助层的剥离技术，运用该技术已研制成功铝栅100位CCD模拟延迟线。

According to application much function block is fixed and fabricated in 0.6μ m mixed signal CMOS process.

根据应用系统确定了保护芯片所需功能模块,然后采用0.6μm混合信号CMOS工艺制作.

A 15% SiC_p/ 2009Al composite was fabricated by high energy milling powder metallurgy ( PM) technique. The effect of velocity and time of milling as well as PM procedure on mechanical properties of the composite was investigated.

采用高能球磨粉末冶金法制备了15%SiC p/2009Al复合材料，研究了球磨转速、球磨时间、加热抽真空工艺、热压成型以及热挤压比对复合材料力学性能的影响。

Highly stable glucose oxidase ( GOx) multilayer films were fabricated on cystamine modified gold electrode surfaces by layer-by-layer self-reaction of periodate-oxidized glucose oxidase.

以胱胺修饰的金电极为基础电极，利用席夫碱反应使经高碘酸根氧化的葡萄糖氧化酶在该电极表面进行自身的层-层有序组装。

Method: Bench and screen style simplified beds were fabricated using timber, steel screen, wire tack, etc.

方法：用木方、钢筛网、轴钉、铁钉、寸带等材料制成夹凳式和筛式两种简易床。

Characterization of BNT ceramic fabricated by solid reaction and hydrothermal synthesis

固相法和水热法制备BNT无铅压电陶瓷及其性能表征

Continuous-fiber-reinforced Cu matrix composites were fabricated based on the electrochemical infiltration technique ( ECI ).

基于电化学浸渗技术 ( ECI ) 在室温下制备了连续铜纤维、碳纤维和玻璃纤维增强铜基复合材料.