fea的例句大全

The design structure of pressure vessel, suspension of boiler proper. strengthen of local load area on shell, FEA calculation and manufacture of 60 t/ h PFBC are described in the paper.

介绍了60t／h增压流化床锅炉压力壳的设计结构、锅炉本体的悬吊方法、壳体上局部载荷区的加强、有限元应力计算以及制造工艺特点。

The heat density functions are looked as the boundary conditions and the 3D temperature fields of the waved-edge milling insert and flat rake face milling insert are analyzed with FEA method and judged with blurry mathematical theory.

以受热密度函数为边界条件，进行波形刃铣刀片和平前刀面铣刀片三维温度场有限元分析，并对有限元分析结果进行模糊数学综合评判。

It is also analyzed the dynamic time-history response of ACMR by programming the FEA program using Wilson method and Newmark method, and the conclusion above is testified.

采用威尔逊法和纽马克法编制有限元计算程序，分析这种结构的动力时程反应，验证了上述结论。

Study on Optimization of Carbody of Low Floor LRV by FEA

基于有限元分析的低地板轻轨车车体优化研究

A preliminary study on the geological fea-tures and ore-dressing of garnet depo-sit in North Jiangxi

赣北某石榴石矿地质特征及选矿初步研究

The Contact Affection to Fea of Connection Rod

接触问题对连杆有限元分析的影响

So asaite has strong ability of research, development and test to design pulley and do FEA to meet all requirement on design and manufacture from customers.

因此，阿赛特具有强大的研发及测试能力，能够独立设计皮带轮，并完成有限元分析，完全能够满足客户的设计制造要求。

Drying process in IC production line, introducing spin rinsing? drying methods after semiconductor wafer cleaning. Also describing the technical principle, structure fea-tures and process applications for newly developed CXS series spin rinse?

从IC生产线晶圆片旋转冲洗甩干工艺出发，介绍了半导体晶圆片清洗后的旋转冲洗甩干方法，以及新近开发研制的CXS系列旋转冲洗甩干机的技术原理、结构特点及工艺应用情况。

The 3D nonlinear finite element analysis ( FEA) and experiments are performed on 195/ 60R14 radial-ply car tire.

对子午线轮胎195/60R14进行了三维非线性有限元分析及试验研究。

A novel FEA model of the precise centreless grinder is built and based on the model the influence of the bed structure on its dynamic behavior is studied.

建立了无心外圆磨床的有限元模型，并分析了床身筋板结构对床身动态特性的影响。

According to the principle of FEA, several kinds of overhead line clamp fittings under different load in electrification railway are analyzed by using of ANSYS program, and material nonlinear and state nonlinear are considered.

基于有限元基本原理，采用有限元分析软件ANSYS对广州地铁一号线电气化铁道接触网上几种不同类型不同荷载工况的抱箍类零部件进行了有限元分析，考虑了材料非线性、状态非线性。

FEA for Overhead Line Clamp Fittings in Electrification Railway

电气化铁道接触网抱箍类零部件有限元分析

Described are the development process, main technical parameters, technical fea-tures, structure, testing and application prospects of the KM_ ( 70) coal bopper car.

介绍了KM（70）型煤炭漏斗车的研制过程、主要技术参数、技术特点、结构、试验情况及应用前景。

FEA of Pre-stressed Anchor Device under Stress and Dimension and Material Optimum of Anchor Head; "Anchorage, grip and coupler for prestressing tendons"

预应力锚具受力过程的有限元分析及锚圈的尺寸和材料优化GB/T14370-1993预应力筋用锚具、夹具和连接器

As there exists a contrary that popular FEA tools have good general usability but poor actuality, this paper accomplishes the design of feature based finite element modeling system by availing of multi features of the object.

针对现有的大型有限元分析系统普遍存在的通用性强与实用性较差的矛盾，利用形体的多个特征，实现了基于特征控制的有限元模型化知识系统的设计。

This research is done on 3D Modeling, Motion and FEA of AVEN based on the software platform of UG, MSC/ PATRAN and MSC/ NASTRAN.

以UG和MSC/NASTRAN、MSC/PATRAN为软件平台，对中国燃气涡轮研究院提供的轴对称矢量喷管（AVEN）方案的运动机构进行了三维实体建模、运动仿真和有限元强度分析等方面的研究。

FEA of Lower Control Arm for Rear Double Wishbone Independent Suspension

后双横臂独立悬架的下控制臂有限元分析

In the fourth chapter, the author sets up the FTA model and FEA model of MAN B& W pneumatic execution units grounding on the FTA and FEA theory. And links up the two matrixes by associated matrix.

论文第四章主要以可靠性理论的故障树分析（FTA）和故障效应分析（FEA）对Man B&W气动装置建立相应的FTA模型和FEA模型，并通过关联矩阵将二者联系起来。

Objective To construct the fine 3 D model of the maxillary first premolar for finite element analyzes ( FEA ).

目的建立上颌第一前磨牙的精细三维模型,并最终应用于有限元分析 ( fea ).

The effect the carcass angle on the endurance of TBR tire bead was investigated by FEA.

利用有限元分析方法研究胎体帘布角度对载重子午线轮胎胎圈耐久性能的影响.