fem的例句大全

Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.

用三维弹塑性有限元分析方法, 全面分析了点焊搭接接头的应力分布情况.

D-FEM can simulate geotechnical construction process including excavation, backfill and it has quickly solving, group function and many material models.

它能模拟岩土工程的开挖、回填等施工过程，且具有求解速度快、群组功能、材料模型多等特点。

The accuracy of the functional is key to computing the electromagnetic field using the finite element method ( FEM).

在电磁场有限元分析中，使用准确的微分算法计算场量是提高计算效果的关键。

Combining the all-function FEM software and the stress analysis of suspension bridge, this paper presents a numerical method based on the finite displacement theory for model building and calculating the inner force of suspension bridges, which meets the demands of engineering construction.

本文以有限位移理论为基础，将现今通用有限元分析软件与悬索桥内力分析结合，探寻一套悬索桥有限元建模、计算的数值方法，以满足工程建设要求。

A finite element method with boundary element method ( FEM-BEM ) is presented for computing electromagnetic induction.

提出了用有限元 - 边界元法计算三维电磁场感应问题.

The steady-state heat transfer model of ceramic hotplate is established, and the results from model calculation are compared with those obtained by FEM simulation.

建立了陶瓷微热板的稳态传热模型，并将模型计算结果同有限元模拟结果比对。

3D FEM dissection of boiler drum of downcomer tee

汽包下降管三通三维有限元剖分

Study on 3D-2D Mixed Sub-Region FEM

层合板三维-二维混合分区有限元法研究

In this paper, the JFO condition, satisfied with global mass continuity, is incorporated into an universal Reynolds equation with micro-polar fluid which is solved for the oil film pressure using OSM and FEM.

本文采用满足全流场质量连续的JFO边界条件，采用微极性流体的广义雷诺方程来求解油膜压力分布，进而获得油膜承载力和粘性阻力等轴承动力特性量；

Nonlinear FEM Analysis of the Load Transfer Character of the Piles with Various Defectiveness

缺陷桩荷载沉降性状的非线性有限元分析

The FEM analysis for the effect of intermesh to plate leveling deformation

压弯量对轧件矫直变形影响的有限元分析

The FEM software ( ANSYS) is adopted for the strength analysis of slide block universal spindle.

滑块式万向接轴因其能在倾角较大情况下传递较大的扭矩而被广泛应用。

According to the structure character of hazardous waste landfill ( HWL) a finite element mode ( FEM) of HWL detection sealed space was established;

根据危险废物填埋场的结构特点，建立了检测层封闭空间的有限元模型；

Three dimensional rigid plastic FEM simulation of backward extrusion& application of local mesh densification

反挤工艺三维刚塑性有限元模拟及其局部网格细分技术的应用

Distribution of removed material in Fluid Jet Polishing ( FJP) was investigated in experiments. The characteristics of fluid velocity and pressure on the sample surface were simulated using Finite Element Method ( FEM) when the fluid jet impacts the work piece.

实验研究了液体喷射抛光技术的材料去除量分布特征，并利用有限元分析方法，分析了抛光头（液体柱）与工件表面相互作用时流场的分布特点。

ANSYS FEM used in the stress calculations of blower hub, which overcomes the limit of the classical method on the stress calculation of complicated surface, is an ideal, accurate calculation method for the simulation on the actual operation of rotor blower hub.

采用ANSYS计算汽轮发电机转子风扇座的应力，克服了经典计算方法对复杂变化曲面应力计算的局限性，是较理想地模拟转子风扇座实际运行工况的计算方法。

Using a 2-D plain strain viscoelastic FEM code, we study the characteristics of the stress fields in deep subducting slabs.

基于粘弹性平面应变有限元数值模拟方法，研究了俯冲带深部的应力场特征。

Multiple load cases and calculating schemes of Baihetan arch dam is analyzed by use of3-dimentional finite element method ( FEM).

采用三维线弹性有限单元法对白鹤滩拱坝进行了多工况多方案分析研究。

Internal force analysis with FEM can provide the foundation to choose the correct reinforcement scheme.

有限元内力分析的结果可为确定合理的加固方案提供依据.

FEM Analysis and Study on the Masonry Gravity Dam with Weak Interlayers Embeded in the Foundation.

软弱夹层地基上浆砌石重力坝有限元分析研究.