hardening的例句大全

Argon arc remelting hardening is a new technology of manufacturing camshaft.

氩弧重熔硬化是生产凸轮轴新工艺.

Does this mean that American economic society is hardening along caste lines.

这是否说明美国的经济社会已经形成了僵硬的等级制度?

The cyclic hardening behavior under different loading paths and different load conditions was studied.

讨论了材料在不同加载路径及不同工况下的循环硬化特性.

High-water rapid-hardening backfilling with whole tailings is a new developed backfilling technology.

全尾砂高水速凝充填技术是一项新近发展起来的充填技术.

This paper discussed forced vibration bilinear hardening suspension , and developed a nonlinear vibration equation.

本文讨论了线性强化材料悬索的强迫振动问题.

The effect of prestretching on age ? hardening and tensile properties of Al ? 5.3 Cu ? 0.8 Mg? 0.3 Ag alloy was investigated.

研究了时效前的预拉伸对耐热Al -5.3Cu-0.8Mg-0.3Ag 合金时效过程和拉伸性能影响.

The key to hardening budget constraint of HEIs is to deprive them of the policy burden.

硬化高校预算约束的关键在于剥离高校的政策性负担.

This is the reason why Fe W Co alloy possesses stronger ability of age hardening.

这是Fe?W? Co合金 较Fe? W?Co?Ni合金 有较强时效硬化能力的原因.

With the increasing of aging time, the Al-Mg-Si-Mn-Cr alloy has remarked age hardening.

Al-0.65Mg-0.7Si-0.3Mn-0.1Cr 合金在150℃、175℃和190℃下时效, 均具有明显的时效硬化特性,脱溶相的析出贯序与Al -Mg-Si 合金相似.

Austeinitic FeCr 18.2 Ni 6.9 Mo 205 C 1.5 alloy can produce an obvious age hardening effect.

奥氏体FeCr18.2Ni6.9Mo2.5C1.5合金时效时可产生明显的二次硬化效果.

Three. They are hardening, temper and anneal.

三种. 它们是淬火 、 回火和退火.

Three: they are hardening, temper and anneal.

三个过程: 它们是淬火 、 回火和退火.

For example , heat hardening, anneal, temper and so on.

有淬火 、 退火 、 回火各种热处理设备.

The line has perfect performances and is widely used for hardening and tempering bearing parts.

该生产线消化吸收国外先进技术,性能优越,主要用于轴承零件的淬、回火.

In diffusion layer , cracks were found after hardening and tempering.

调质使得扩散层产生裂纹.

At high temperature uses are: sintering, welding, hardening, sintering, tempering, Xu cold.

在高温下使用用途有: 烧结 、 焊接 、 淬火 、 烧成 、 回火 、 徐冷.

The author sum up experiences about laser surface hardening process of many years.

总结了该厂多年激光表面硬化处理经验.

Continue to improve the urban road construction, complete urban trunk road hardening.

继续完善城镇道路建设, 全面完成城镇主干道硬化.

Microstructure and tribological properties of two Febased sintered materials after widebond laser surface hardening were studied.

研究了两种不同成分铁基烧结材料激光扫描后的显微组织和摩擦学特性.

The developing trend of the hardening numerical control system is specialization, intelligentization and network forming.

专业化 、 智能化和网络化是感应热处理设备数控系统发展的必然趋势.