hardness的例句大全

The hardness and chewiness of meitauza increased obviously in the fermentation process.

发酵过程使霉豆渣的硬度和咀嚼性明显提高。

Moreover, separately added KGM and KSAP could also reduce the hardness, gumminess and chewiness of recombinant poultry hams.

火腿硬度值、胶着性和咀嚼度降低，弹性改善。

Can we control the hardness of the steel when it is hardened?

我们能够在钢淬火时控制它的硬度 吗 ?

Chen-style Taijiquan Routine 1 emphasizes softness with hardness hiding in.

陈氏太极拳小架一路以柔为主,柔中有刚,以腰为主宰,用螺旋缠丝劲.

Yellowing resistance, Hardness, Gloss, Compatibility with CAB, Water and gasoline resistance.

耐黄变性，硬度，光泽，和CAB相容性，耐水，耐汽油性。

Hardness, Adhesion, Gloss, Yellowing resistance, Color dispersibility.

硬度，密著性，光泽，耐黄变化，色分散性。

Sor-bic acid did not effect hardness, adhesiveness, stickness and cohesiveness ( p0.01), but significantly influenced gumminess of sausage ( p0.01).

对香肠硬度、粘着性、粘滞性、内聚性也无影响（P0.05）；

At the same time, the braking material based on benzoxazine from bisphenol and phenolic resin in the presence of hexamine and Lewis acid have been prepared, and the frictional coefficient, tear and wear propert, impact strength and hardness of this material have been determined.

同时制备了以六次、线酚、中间体为主要树脂基体的制动材料，并测定了制动材料的摩擦磨损性能、冲击强度和硬度。

Application of HLN Hardness Tester in Testing Huge Workpiece

里氏硬度计在大型工件测试中的适用性

UV surface hardness, resistance , Naisuan Jian, resistant to salt spray, UV cured with certain anti-bacterial effect.

UV表层硬度高, 耐磨, 耐酸碱, 耐盐雾, UV固化后具有一定的抗菌效果.

UV surface hardness, resistance , Naisuan Jian, resistant to salt spray, UV cured with certain anti-bacterial effect.

UV表层硬度高, 耐磨, 耐酸碱, 耐盐雾, UV固化后具有一定的抗菌效果.

Further more, the ratio of the main compositions of the alkaline bath is very important for its tempering effect. The results strongly indicate that the contents of alkali and the anti-oxidation reagent can significantly affect the hardness.

碱浴的配比很重要，其中碱和脱氧剂的用量对回火硬度影响显著。

Compared with brush plating Ni, brush plating Fe has more as low cost and high hardness.

刷镀铁与刷镀镍相比具有成本低、硬度高的优点.

The best performance of millimicron surface layer can be obtained when the composite material is molded under shaping pressure 1.5 GPa and annealed at 350 t, whose hardness is up to around 290.

压强为1.5GPa压制成型的复合材料，经350℃退火可获得最佳性能的纳米表面层，显微硬度值可达到290左右。

Product characteristics: compared with the natural stone material, high hardness, resistance to corrosion resistant dirty oil.

产品特点: 份量轻(与天然石材相比) 、 硬度高 、 耐油耐脏耐腐蚀.

The surface layers are characterized by means of optical microscope, TEM, SEM and micro-hardness testing machine.

用光镜、扫描电镜 、 透射电镜和硬度计等手段分析并研究其表层变形层金相组织 、 晶粒尺寸及显微硬度.

Changing the number of the teeth of a pinion gear or the hardness of the surface of tooth and other parameters, the different results will be gained.

只要改变小齿轮齿数或齿轮齿面硬度及相应的有关参数，可得到齿轮传动计算的不同结果。

Back hardness varied from ROCKWELL "C" 11.0 to15.5 in long undulations to back surface.

后部钢材的洛克维尔C级硬度从15.5呈长波浪形减弱直到背部表面的11。

When the RE metal salt was 2 %, the coating had the best density and hardness.

当稀土金属盐加入量为2%时镀层密度最大、显微硬度最高.

Analysis results indicate that the particle characteristic may affect tablet weight variation, content uniformity and hardness.

结果发现粒度特性对片重差异 、 片剂的含量均匀度及片剂硬度有明显的影响.