hardness的例句大全

Hardness, Adhesion, Gloss, Yellowing resistance, Color dispersibility.

硬度，密著性，光泽，耐黄变化，色分散性。

Yellowing resistance, Hardness, Gloss, Compatibility with CAB, Water and gasoline resistance.

耐黄变性，硬度，光泽，和CAB相容性，耐水，耐汽油性。

Chen-style Taijiquan Routine 1 emphasizes softness with hardness hiding in.

陈氏太极拳小架一路以柔为主,柔中有刚,以腰为主宰,用螺旋缠丝劲.

Can we control the hardness of the steel when it is hardened?

我们能够在钢淬火时控制它的硬度 吗 ?

Moreover, separately added KGM and KSAP could also reduce the hardness, gumminess and chewiness of recombinant poultry hams.

火腿硬度值、胶着性和咀嚼度降低，弹性改善。

The hardness and chewiness of meitauza increased obviously in the fermentation process.

发酵过程使霉豆渣的硬度和咀嚼性明显提高。

Check drawing for accuracy, material selection, proper machining techniques, finishes hardness, etc.

确认绘图准确性, 选材, 妥善加工技术, 饰面硬度.

All transmission shafts are chrome plated to increase hardness.

所有传动轴镀铬,增强硬度.

The relationships of current density with deposition rate, crystal size and hardness of deposit were studied.

研究了电流密度与沉积速度 、 晶粒尺寸及镀层硬度的关系.

EHC's manufacturing process can accommodate wide-ranging dimensions, hardness, colours core configurations and material combinations.

依合斯提供各种尺寸, 硬度, 颜色,构造和材料的滚轮.

Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state.

高于此点，由于超过共析点钢完全由珠光体和退火状态的渗碳体组成，硬度增加并不多。

The results show that the catalytic cementation nitrocarburizing below the eutectoid temperature has a rapid penetrating rate and high hardness for the diffusion layer.

结果表明，在共析温度以下进行催渗氮碳共渗，具有渗速快、渗层硬度高的特点；

In this paper The hardness of grey iron is related to the amount and fineness of pearlite in the matrix, and is effected to a great extent by the amount of primary austenite and its eutectoid structure.

结果表明，灰铸铁的硬度不仅与基体中珠光体的含量和细化程度有关，而且在很大程度上还取决于铸铁结晶过程中初生奥氏体量及其共析转变的结果。

For detecting the reason of leakage of dry-gas-compressor ′ s rear condenser in its severed work field, we analyzed the linkage structure of its rube plate and heat transfer tube, and used Li Ke ⅱ hardometer to test the hardness.

为查明干气压缩机后冷凝器在服役现场泄漏的原因，分析了其管板与换热管的连接结构，并用里氏硬度计对管板和换热管进行了硬度检测。

Compared with reactive sputtering and reactive evaporation deposition, indium oxide fims thus prepared has better adhesion to the glass substrates with improved surface hardness due to the high implantation energy.

与反应溅射和反应沉积相比，此法制备的氧化相膜与玻璃基体的附着良好，并因高的注入能量而改善了玻璃表面硬度。

And a small quantity of m-UFD ( surface modified UFD) with 0.2% weight percentage can improve the flexural strength and hardness by 35.4% and 29.8% respectively. The m-UFD was superior to n-UFD ( not surface modified UFD).

加入0.2%（质量分数）的改性纳米金刚石后，复合树脂的挠曲强度和硬度分别提高35.4%和29.8%，改性金刚石的增强作用明显优于未经改性的金刚石；

High hardness and resistance coating JCW-B via arc spraying.

采用电弧喷涂方法制备的高硬度耐磨损JCW -B 涂层可广泛应用于工业零部件耐磨表面.

This paper researches law of tool material hardness affecting wear in ultrasonic machining.

通过试验研究了以硬度为主的材料性能对超声加工工具磨损影响的规律.

The lethal concentration is inversely proportional to pH and water hardness.

半致死浓度Lc50与pH和水的硬度成反比。

Hardness property and wear resistance of al_2o_ ( 3p)/ Zn-Al composite

Al2O（3P）／Zn－Al复合材料的硬度与耐磨性能