heat的例句大全

Investigation on liquid/ solid phase change heat transfer of aircraft icing

飞机结冰过程的液/固相变传热研究

A liquid level control scheme designed for a waste heat boiler used with a 2-section boiler for making steam by means of natural gass

天然气造气二段炉出口废热锅炉液位控制

Application of frequency change speed governor in AC motor used for heat treatment in boiler making industry

交流变频调速器在锅炉制造行业热处理炉风机上的应用

Research on the Use of Waste Heat at the Natural Gas Booster Station

增压站天然气发动机余热利用方案研究

And then, four nuclear boiling heat transfer models are focused on.

其次，重点介绍了核态沸腾换热的四种经典模型。

According to the results in this experiment, based on the similarity between flash evaporation and nuclear boiling, an experimental expression of heat transfer coefficient with all of the influence parameters was presented with the maximum error of 27%.

根据实验结果，基于闪蒸过程类似核态沸腾，给出了换热系数与各影响参数之间关系的实验关联式，与实验结果的误差小于27%。

In operation since the early1970s, Japan's Fukushima Daiichi nuclear plant uses six boiling water reactors, which rely on uranium nuclear fission to generate heat.

从19世纪70年代投入运行以来，日本福岛第一核电站利用六个沸水堆，通过铀核裂变来产生热能。

According to rigorous procedures, pool boiling heat transfer curve under subcooling of 24 K was obtained.

严格按照沸腾传热试验程序得到了过冷度为24K时的池沸腾传热曲线。

Study on the Enhancement of Nucleate Boiling Heat Transfer by Applying Electric Field

光滑管外核沸腾换热的电场强化实验研究

Effect of CaCO_3 scale formation on heat transfer of pool nucleate boiling

CaCO3垢的形成对池核沸腾传热的影响

Investigation on Heat Transfer in Nucleate Boiling Magnetic Liquid

液体泡状沸腾放热的研究

Nucleate boiling of binary mixture at high heat flux under microgravity

微重力下高热流时池内双组分核态沸腾

Experimental study of nucleate boiling heat transfer with impingement circular submerged jets

圆形液体浸没射流冲击核沸腾传热的实验研究

The Heat Transfer Model between Bolt and Bolt Hole of Bolted Flange Sealing

法兰密封中螺栓与螺栓孔的传热学模型建立

Low alloy heat-resistant bolting steel is widely applied in large-capacity steam turbine and other generating machinery.

低合金耐热螺栓钢广泛应用于大功率汽轮机等发电设备中。

However, the composite layer material itself has a very complicated manufacturing process. As differences in manufacturers or production technology, solder thickness and uniformity will affect the heat transfer during brazing and solder flow, which create difficulties for the brazing process.

而复合层材料本身就是很复杂的制造过程，由于生产厂家或生产技术的差异，钎料层厚度及均匀度会影响钎焊时的传热与钎料的流动情况，为钎焊工艺带来困难。

Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing

高频感应钎焊硬质合金接头热处理工艺研究

Magnesium Alloy Melting Furnace Structure Design and Research Based on Flow Heat Transfer Analysis electric brazing machine and apparatus ( excl. furnaces, ovens and heating equipment)

基于流动传热分析的镁合金熔化炉结构设计与研究电硬焊机器和设备（熔炉，烘炉和加热设备除外）

Research on Braze Welding Procedure of Automobile Heat Exchanger in Nitrogen Oven

汽车空调热交换器氮气炉钎焊工艺的研究

The Al-Cu eutectic brazing metal is made to braze pure aluminium substrate in vacuum. The diffusion phenomenon of Cu in pure aluminum bar under different brazing temperature and heat preservation time is investigated by means of SEM and EDS.

制备Al-Cu共晶合金钎料，用SEM和EDS研究不同钎焊温度和保温时间条件下，纯铝棒料基体对接真空钎焊接头Cu元素的扩散行为。