laminates的例句大全

In composite laminates there are four basic failure modes: matrix cracking, delamination, fiber breakage and debonding.

复合材料层合板中存在四种基本的失效模式,即: 基体开裂 、 分层 、 纤维断裂及脱粘.

The characteristics of interlayer metal have effect on the performance of whole laminates.

夹层金属材料本身的性能对叠层材料整体的性能也有一定的影响.

The ideas and methods on the structure design of composite laminates are put forward.

从合层板的弯曲刚性出发,提出了复合材料层合板的结构设计的思想和方法.

The failure analysis methods for composite laminates have been also discussed in this paper.

本文还讨论了复合材料中的失效分析方法.

A comprehensively coupled thermo-piezoelectric-mechanical model of composite laminates with single surface bonded piezoelectricapplied loads, is developed.

本文针对一种单面粘贴压电材料的复合材料层合板结构,建立了一种热 - 机-电完全耦合模型.

These versatile laminates provide extremely high impact resistance and absorb total impact energy without spalling.

这些通用板材具有高抗冲击性,能吸收所有冲击能量而不碎裂.

The behaviors and effective factors of laminates under flexural stress are analysed in this paper.

本文分析、讨论了积层板材料,在弯曲应力下的各种性能及影响因素.

The given solution satisfies all fundamental equations of elasticity and continuity conditions between the laminates.

此解满足层合板的基本方程和层间连续条件.

Decorative Laminates, Used Clothing, Rice, Sugar, Cement and Sand.

采购产品装饰积层塑料板,二手的衣服, 大米, 糖, 水泥和沙子.

The rehabilitation of reinforced concrete structures with CFRP laminates is a new reinforcement technique.

碳纤维布加固混凝土结构是一种新型的结构加固方法.

Transverse cracking of matrix is a main damage type of cross-ply laminates.

基体横向开裂是复合材料正交层板的主要损伤类型.

By means of velocity feedback control agolrithm the active vibration control of laminates is fulfilled.

并采用速度反馈控制实现了层合板的主动振动控制.

Stress singularity and inhomogeneity in composite laminates . 6.

复合材料结构之应力奇异性相关问题.

The three-dimensional exact solution methods for dynamic problems a finitely long piezoelectric composite laminates are studied.

有限长压电层合板结构动态问题的三维精确解研究.

The direction stabilizer of aircraft can be improved by optimizing the composite laminates of vertical stabilizer.

通过优化垂尾复合材料蒙皮铺层体系,可以减少垂直尾翼的气动变形,进而改善飞机的方向安定性.

This paper presents a method for the optimum and robust design of composite laminates.

提出一种复合材料层合板的优化设计和鲁棒设计分析方法.

Study on the shrinkage deformation of thin composite laminates during curing process ductile damage analysis for fracture in sheet metal forming based on GTN mesoscopic damage model

复合材料薄板的成型固化收缩变形研究基于GTN细观损伤模型的板料成形过程损伤分析

Stability Analysis of Composite Laminates THE TECHNOLOGY OF MULTIPLE LAYER METALLIZING FOR SBD

复合材料层合板的稳定性分析肖特基二极管多层金属化技术

Copper clad laminates ( CCLs) with high performance based on modified polytetrafluoroethylene ( PTFE) were prepared by using blended tetrafluoroethylene and hexafluoropopylene ( FEP) as the modification resin.

利用聚全氟乙丙烯（FEP）共混改性聚四氟乙烯（PTFE），制备了高性能聚四氟乙烯覆铜板。

For a modified Double Crack Lap Shear ( DCLS) specimen of fiber reinforced metal laminates, an expression which relates its delamination size and its compliance is derived. A method for determining the delamination size in DCLS by compliance test is developed.

导出了纤维金属胶接层板双面裂纹搭接剪切（DCLS）试样分层尺寸和柔度之间的线性关系式，提出了DCLS试样分层尺寸的柔度测量法，并与用光测法测得的分层尺寸进行了对比。