mandrel的例句大全

Electroformed apertures reproduce the mandrel photo resist finish faithfully and do not require any further processing.

电铸复制卷筒照片孔型图,不需要进一步的加工.

Introduce an experimental analytics axis-thrust tube bending on horn mandrel.

介绍了一种分析牛角芯棒上热推弯管成形过程的实验解析法.

Non-mandrel drawing is a method widely used in cold drawn pipe production.

无芯棒拔制是冷拔钢管生产中应用最广泛的一种生产方法.

APPLICATION: For grid filaments, hooks, mandrel filaments and spark wires dicing etc. on electric source industry.

用途: 用于电光源用栅丝 、 吊钩 、 芯线及电火线切割等.

Advantages of employment of semi-floating mandrel mill to produce small and medium tubes are elaborated.

提出了小型无缝钢管生产机组选用半浮动芯棒连轧工艺的优势.

Insert the handle crank to the faucet of the screw mandrel mechanism.

将手柄插入到丝杆机构的插口中.

The winder will consist of an air expanded winding mandrel.

卷取机由气动胀缩卷筒组成.

After the mandrel is melted, a thin layer of alloy remains on the propellant surface.

此心轴溶化之后, 在推进剂表面上留有一薄层的合金.

The calculation is mader for standard tools with a plug mandrel according to figure 4.

根据图4计算的该结果是用于带插入式滚轴的标准装具(模具)的.

Through experiments, the method and values to ensure spinning technology parameters of no-mandrel roller were gained.

通过实验, 给出了无心轴托辊管体的旋压过程中工艺参数的确定方法和数值.

The winding mandrel will be overhung type, mounted in two standard bearings.

卷筒是悬垂式的, 安装在两个标准轴承内.

One way is to use a hollow billet and then use a fixed or floating mandrel.

一种方法是使用空心坯,然后使用固定或浮动芯棒.

In comparison, the influences of the lengths of metal mandrel, insulated rod and return circuit electrode on depth of investigation are relatively small, while that of the length and width of plate electrode are relatively large.

相对而言，金属芯棒、绝缘棒和回路电极的长度对探测深度的影响较小，而极板的长度和宽度影响较大。

Application: Mandrel built suction and discharge hose for conveying beer, wine vinegar, portable water and food stuffs.

输送、吸引啤酒、葡萄酒、醋、便携式水和食物。

By mandrel reaming method, hollow billet thickness is reduced to the certain thickness of cylindrical forging, then after longitudinal split and flattening process, flat forging with the ideal size is completed.

该方法首先将空心铸坯芯轴扩孔至具有一定厚度的圆筒锻件，然后对其进行纵向剖切，再经过展平等工序得到所需尺寸的成品件。

Three-dimensional numerical simulation of the combined process of stretch spinning and drawing for the overlength circular cone pipe without mandrel

超长圆锥管无芯模旋拉过程的三维数值模拟

To enhance thermal-wear resistance of the mandrel, it is required to use mandrel material which has dispersed carbide, linear expansion factor of the base metal close to that of the chide film, minimum elastic modulus and maximum thermal conductivity factor.

为了提高芯棒的抗热损伤性能，应使芯棒材料的碳化物弥散化，基体金属与氧化膜的线胀系数相接近，弹性模量尽量低，热传导系数尽量高。

Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test

锌包层之重量，铜硫酸盐试验之酸洗次数及测试用卷筒直径

The microcomputer controlled filament-wound machine for forming tee pipe, processing mechanism, and mandrel design are given in this paper.

本文简单介绍了由计算机控制纤维缠绕三通管的设备工作原理及芯模设计。

Metric Structural Flush Bresk Pull Mandrel Self-Plugging Blind Rivets

米制钢结构抽芯自锁盲铆钉