melt的例句大全

It pretty quickly started to melt underneath and then stuck to the kitchen hotplate. It then caught fire.

它很快就从底部开始融化，之后便粘到了厨具上，然后就起火了。

Application: Suitable for Hot Melt Glue Gun, Used In Electron parts or coi. l, Etc.

用途: 适用于热熔胶枪, 用于需求耐高温和阻燃的电子器材部件和线圈等.

The crystallinity of polypropylene with different melt flow rate ( MFR ) are measured by X-ray method.

用 X 射线法测定了不同熔体流动速率下聚丙烯材料的 结晶度.

Rising temperatures could melt permafrost and destabilise the railway's foundation.

在全球变暖的大背景下，不断增加的气温也可能消融永久冻土带，让铁路的路基松动。

The combined vacuum distillation and melt crystallization technology was used to purify DDHI from artificial musk.

通过减压精馏熔融结晶耦合技术研究提高人造麝香(DDHI)含量的原理和工艺流程.

The power failure caused a refrigerator melt that was a disaster.

断电导致冷藏库融化,这真是一场灾难.

Omputer simulation of the temperature field of the mold, which is used for producing the low cost solar cell silicon sheet with the Electromagnetic Levitation-melt Centrifugal Casting ( ELCC) technology, is carried out with the finit element method.

运用有限元法对太阳电池硅片电磁悬浮熔炼离心铸造（ELCC）技术中成形模具的稳态温度场进行了计算机模拟。

Study on the rheological behaviour of copolyether ester EDDP melt

共聚醚酯型EDDP熔体流变性的研究

Self-modification in EASA is attributed to the occurrence of a severe undercooling during solidification, which is related with the formation of homogeneous melt and the electric current in electrolysis process.

合金组织对冷却速度不敏感，具有遗传性，合金具有良好的韧性和塑性。电解Al-Si合金熔体为均质熔体，凝固时出现大的过冷度是形成变质组织的原因。

Purification of artificial musk DDHI by combined vacuum distillation melt crystallization technology

减压精馏-熔融结晶耦合装置提纯人造麝香的研究

For blow molding , melt temperatures of 160� � C to 220� � C are recommended.

吹塑成型的推荐熔化温度在160到220度之间.

Optional use of electricity or water defrosting defrosting, defrosting time is short, resulting in less heat, melt cream completely;

可选用电化霜或水融霜，融霜时间短，产生热量少，融霜完全；

The Degassing Effect of JDN-I Flux on Aluminium Melt

JDN-I熔剂对铝熔体除氢净化效果的研究

Degassing Effect and Influence of Rotating Degassing Unit on Components of Aluminum Melt

铝熔体旋转喷吹的除气效果及其对成分的影响

The results show that, after laser surface processing, a melt layer with cellular dendrite structure is formed, which could transform into very fine grained structure during the annealing treatment.

结果表明，激光处理后试样表面熔凝区的组织主要为胞状枝晶组织，经后续热处理可转变为细小的等轴晶粒组织，并形成了良好的超塑连接条件。

The improved model was applied to simulate the dendritic features, in the cases of the free dendritic growth from an undercooled melt, competitive columnar growth in the directional solidification and equiaxed dendritic evolution.

应用改进的模型模拟了不同择优取向的单枝晶在过冷熔体中的自由生长、定向凝固过程中柱状晶的竞争生长以及等轴晶的演变过程。

Bimodal polypropylene ( BMPP) and nucleated bimodal polypropylene ( BMPP/ NA) were synthesized in a small stirred bed reactor, and the crystallization, melt behavior and mechanical properties of the samples were investigated.

在小型反应器内合成了双峰聚丙烯（BMPP）和含有成核剂的双峰聚丙烯（BMPP/NA），考察了试样的结晶、熔融行为和力学性能。

Melt-hot melts achromatous, tasteless, no pollution, long-lasting good.

熔融 型 热熔胶无色, 无味, 无污染, 长效 性好.

His face became suddenly black and the features seemed to melt and alter.

他的脸突然发黑,脸上五官好像溶化了,又好像在变形.

When you melt ice, it passes from a solid to a liquid state.

你把冰融化时, 冰便从固态变成液态.