molding的例句大全

Flow behavior of glass mat reinforced polypropylene in compression molding

玻纤毡增强聚丙烯模压成型的流动行为

Fiber Distribution During Compression Molding of Glass Mat Reinforced Polypropylene

玻璃纤维毡增强聚丙烯在压缩模塑流动过程中的纤维分布

In this paper the processing methods and applications of TPX were reviewed Injection moldin, extrusion, blow molding and so on were included.

本文重点介绍了TPX的常用加工方法，如注塑成型、挤出成型和吹塑成型等；

Effects of Molding Process on Property of xPMS-( 1-x) PZN Ceramics

成型工艺对xPMS-（1-x）PZN陶瓷性能的影响

First, producing 2D dot files by software, such as Pattern Editor, AutoCAD and so on. Second, making dots on the module by Laser engraver machines. At last, obtaining dual-emitting LGP samples by injection molding.

通过Pattern Editor、AutoCAD等软件制作了二维网点文件，利用激光雕刻机对模仁进行网点加工，最后通过注塑成型的方法制作了双出射导光板样品。

Pitch resin base-composites and phenolic resin base-composites were prepared by molding with carbon fibre.

分别以沥青树脂和酚醛为基体与炭纤维复合,通过模压成型,得到实验室复合材料试样.

Big a summer vacation: Fuzhou ten thousand molding tool limited company, the practice that oneself seek.

大一暑假: 福州万凯模具有限公司, 自己找的实习.

A miscellaneous playwright is while molding female person image, the subconscious ground was divided into the woman of good family the single young girl with married women two category type.

元杂剧作家在塑造女性人物形象时，下意识地把良家妇女分成了未婚少女与已婚妇女两种类型。

Metal Injection Molding, One step Vacuum de-wax sintering process, Powder metallurgy monthly.

1金属粉末射出成型真空一次 脱蜡 烧结法, 粉末冶金月刊.

This paper studies the technology of preparing isotropical Nd-Fe-B magnetic through powder injection molding process. At the same time, the eventual magnet quality of Nd-Fe-B bonded magnet affected by magnetic powder by milling, filler surface treatment, binder, magnetic powder loading was discussed.

本课题围绕粉末注射成形的工艺过程，研究了磁粉细化，磁粉表面处理和粘结剂种类，磁粉装载量对注射成形粘结Nd-Fe-B磁体性能的影响。

Applicable on rotating and sliding vertical injection molding machine.

转盘机或滑板机等多工位成型中水口料头之夹取.

On-line testing of the pressure-volume-temperature properties of acrylonitrile-butadiene-styrene using an injection molding machine

基于注塑机的ABS树脂PVT特性在线测试

Study on Effects of Heat Transfer Coefficient between Polymer and Mold on Melt Filling Flow in Micro Injection Molding

微注塑成型中熔体与壁面间传热系数对充模流动影响的研究

The characteristics of RTM ( Resin Transfer Molding) process are introduced, the mold filling flow, the gists of process controlling and the method of mold design of RTM to produce high accuracy plane radome are briefly described.

介绍了RTM（树脂传递模塑）工艺的特点，并对RTM法制造高精度飞机雷达罩的充模流动、工艺控制要点和模具设计方法等作了简要的论述。

On Molding Process and Properties of BMI/ Glass Cloth Composite

双马来酰亚胺（BMI）&玻璃布复合材料成型工艺及性能研究

Be familiar with assembly process with concept of molding and stamping.

熟悉装配流程,对注塑和冲压有所了解.

Familiar with molding, assembly process.

熟悉注塑或装配工艺.

This is because of the sheepskin extremely high layer to announce a person at these boot tents to1:00, Christian Louboutin, because of it of molding tool arrive a person's feet form.

这是因为羊皮超高层发表人在这些靴子帐篷给一点，因为它的模具到一个人的脚形。

The CO2 GMAW has the advantage of high effect. Save power smaller distortion of welding and elegant welding molding. Along with developing and application of nation the CO2 GMAW machine.

CO2气体保护焊具有高效、节能、焊接变形小、焊缝成形美观等优点，且随着国产CO2气体保护焊机和焊丝开发应用，只要合理使用CO2气体保护焊，其在汽车工业中有很大的使用价值。

Mold temperature control Series auxiliary equipment such as injection molding machine Products.

模具控温系列等注塑机辅助设备产品.