molding的例句大全

Glycidyl methacrylate ( GMA ) modified soy protein isolate ( SPI ) plastics were prepared via the compression molding.

用模压的方法制备了甲基丙烯酸缩水甘油酯 ( GMA ) 改性大豆分离蛋白质 ( SPI ) 塑料.

The percentage reduction in molding pressure is higher if part becomes thinner when using ICM.

使用射出压缩成型时成品较薄的部分成品压力变化的百分之将提高.

For manufacturing, UMT utilizes reliable castings and molding of aluminum for volume production.

在制造上, UMT使用了令人信赖的浇铸及铸造来作大量生产.

The screw tube oscillator is used to produce vib ration in the polymeric dynamic molding equipment.

螺管激振器用于在新型聚合物动态加工设备中产生轴向振动.

Apart from mold molding, the Group also provides its customers with value-added services such as product design, spray-painting, silkscreen printing, pad printing assembly.

除了模具和产品成型外，公司还为客户提供产品设计、喷油、丝印和组装等超值的服务。

Overall responsible for all molding process documents maintain, PFMEA update and optimization.

负责整个注塑制程的文件维护, 过程FMEA的更新和优化.

CCFM series vibration rolling machines use external vibration roller compacted molding technology.

CCFM系列振动碾压成型机采用外置式振动碾压成型技术。

The background and status of the new autoclave/ VARTM integrated molding process technology is discussed in this paper. The system scheme and design principle are presented on basis of the technique principle.

阐述了热压罐/VARTM组合技术提出的背景，介绍了国际上该项技术的发展现状，并根据该技术的原理提出了系统方案和设计思路；

New arts Discussion on Autoclave/ VARTM Integrated Molding Process

热压罐/VARTM组合成型新工艺

The fabric samples were prepared with three different weaving densities, and consolidated with vacuum assisted resin transfer molding ( VARTM) technique.

以平纹机织工艺制备三种不同织造密度平纹织物，用真空辅助树脂转移传递（VARTM）法完成环氧树脂浸润及复合材料试件固化。

The composite skirts for solid rocket motor shells fabricated by VARTM ( VacuumAssisted Resin Transfer Molding) had poor mechanical properties because the fiber volume fraction was very small.

VARTM工艺成型的固体火箭发动机壳体复合材料连接裙段构件纤维体积含量较低，复合材料力学性能不佳。

The PVCSlush molding powder filled by superfine powder of Al ( OH ) 3 is investigated inthis paper.

生产聚氯乙烯搪塑粉料制品采用超细的氢 氧化铝 粉末作为填料可以改善搪塑制品的性能.

For blow molding , melt temperatures of 160� � C to 220� � C are recommended.

吹塑成型的推荐熔化温度在160到220度之间.

I still wonder whether we need to stick the edge of the blow molding for fixing.

我仍然还想知道:吸塑的边上是否需要粘贴东西固定?

Die types are: plastic mold, stamping die, aluminum zinc alloy die-casting molds, blow molding die.

模具类型有: 塑胶模具 、 冲压模 、 铝锌合金压铸模具 、 吹塑模.

The blow molding machine consists a rotary blow-station device, an infeed and an outlet transfer devices.

吹瓶机是由旋转式吹瓶模座搭配入胚与出瓶输送装置而组成的.

Accordingly, research and development on large plastic blow molding equipments are quite important for actual application.

因此, 对大型塑料中空成型设备的研制和开发具有重要的应用价值.

Jurong City Jun Hong plastic products factory is specialized in producing injection type, blow molding products.

句容市洪军塑料制品厂是专业生产注塑类 、 吹塑类产品.

Our introduction of automatic blow molding equipment, has a wealth of experience and strong technical.

本厂引进全自动吹塑成型设备, 具有丰富经验,雄厚的技术.

Effect of Operation Parameters on Flow Molding of Glass Mat Reinforced Thermoplastics

操作参数对玻纤毡增强复合材料流动成型的影响