moulding的例句大全

This article describes two auxiliary devices that could increase the repeatability of an injection moulding machine.

这篇文章会介绍两种辅助装置,他们可以增强注射机的重现性.

Rubber to natural rubber or synthetic rubber as raw material and take handcrafted or moulding.

橡胶版以天然橡胶或合不败橡胶为质料,拔取手工雕镂或模压法制不败.

In the injection stretch blow moulding process, injection moulding machine is used to make the preform.

注拉吹工艺先用注塑机注出瓶坯.

Figure 1 shows the part weight distribution of quality moulding and suboptimal moulding.

图一显示了高品质成型和低品质成型所生产产品的重量分布.

We can also adopt sand shell moulding or metal mold casting as for allotype castings.

对异形铸件,还可用砂型铸造或金属型铸造.

Lastly, the paper programs to simulate FRP airfoil FW moulding by VC ++.

最后, 本文用VC++进行编程,从而模拟FRP飞机机翼FW成型 整个过程.

A new process of the rotational moulding process for 3-D braiding was designed.

旋转模塑是一种以塑料粉末为原料成型中空塑料制品的工艺.

Mix organics into Polytetrafluoethylene Resin at low boiling point shaped by moulding and sintering.

利用低沸点有机物混入聚四氟乙烯树脂经模压干燥烧结成型.

A warpage analysis provides answers to questions as: will the moulding distort?

变形分析可以对我们的难题进行解决,如: 这个产品是否存在扭曲变形?

This paper introduces the production technology of the injection and extrusion moulding of Nylon 11.

介绍尼龙11的注射成型和挤出成型工艺,并讨论了生产中易出现的问题及其解决办法.

The filling phase of the injection moulding process greatly affects the quality of the end product.

在注塑过程中填充阶段对产品最后的成型的质量有着巨大的影响.

Electroplate, electrophoresis, spraying paint, gushing out and moulding the indispensable equipment in the trade.

是电镀 、 电泳 、 喷漆 、 喷塑行业中不可缺少的设备.

The EPDM was vulcanized by reaction extrusion moulding.

采用反应挤出法对EPDM进行动态硫化.

Even point usually in moulding are see niches, and you want to avoid the gum line.

连点通常开在产品成型后不易看到的隐蔽处, 并且要避开胶线位置.

The friction coefficient arisen between the moulding sand and the inner walls of the flask is 0.5 and the angle of friction is 27 °.

型砂和砂箱内壁之间的摩擦系数为0.5，摩擦角约为27°。

An 8-cavity preform mould costs more than the injection moulding machine that holds it.

八腔以上的模具价钱比注塑机还要高.

The composition of HAAKE torque rheometer and its application to polymer moulding were introduced.

介绍了HAAKE转矩流变仪的系统组成及其在高分子材料成型加工中的应用.

Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.

将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成.

Solid polyurethanes are similar to injection moulding materials, and more suited to thinner wall sections.

固体聚氨酯类似注射成型材料, 更适合薄壁截面零件.

Die Castings, Plastic Moulding, Die Casting, Chrome Plating, Plastic Moulding, Presswork Die Castings.

采购产品压铸件, 塑胶成型, 压铸, 镀铬, 塑料成型, 印刷品压铸件.