nitriding的例句大全

By experiment, we knew the nitriding deformation rule of joint bearing and improved the technology method.

通过实验, 掌握关节轴承氮化变形规律,改进了工艺方法,在提高零件精度和质量的同时,降低了生产成本.

After nitriding, the abradability of the boring axis is increased greatly.

氮化可明显提高镗轴的耐磨性.

Nitriding cannot be performed during encapsulated or post-HIP pressing due to closing of the pore structure.

氮化无法执行期间,包裹或后髋关节迫切,由于关闭的孔隙结构.

The surface coating of titanium coating coating, coating, nitriding, chromium nitride coating.

本色, 镀钛涂层, 氮化涂层, 氮化铬涂层.

There are a lot of methods for measuring nitriding depth, including structural corrosion method.

现有的测量氮化层深度的方法很多, 国内大多数采用组织腐蚀法.

In this paper, technology of nitriding steel is presented.

简要介绍了离子渗氮技术的最新进展.

So the testing nitriding quality becomes very important.

因而,检验镗轴的氮化质量十分重要.

And its result is that through developing the hardness of soft-nitriding products can be remarkably increased.

结果表明通过改进可以显著提高产品软氮化硬度.

To increase production capacity of nitriding ferroalloys, reducing production cost, PSA nitrogen plant is selected.

提高氮化合金的生产能力, 降低生产成本, 采用了PSA制氮系统.

Spalling was a major form of contact fatigue failures in nitriding steel.

氮化钢的主要接触疲劳破坏形式是剥落.

Nitrided layers with golden yellow color were fabricated by laser gas nitriding.

激光气体氮化在基体上成功制得表面呈金黄色的氮化层。

The company's nitriding process is divided into: gas soft-nitriding, MGN and gas rigidity-nitriding.

公司的渗氮工艺分为：气体软氮化、MGN和气体硬氮化。

The results show that the new fluid nitriding process, which the key component is the fluid bed reactor, could make synthesis condition assuasive, low cost and good effect.

结果表明：以流化床反应器为核心的流化氮化新工艺合成条件温和、原料成本低、效果好。

Vacuum gas nitriding ( VGN) technology was adopted and evaluated for well casing to against the corrosion in Changqing oilfield.

针对长庆油田油井套管腐蚀问题，采用并评价了真空渗氮工艺。

The two abnormal structure result from the migration of γ/ a interface in the second stage lowering temperature nitriding.

带状的a相区与基体邻接。这两种反常组织是由第二段降温渗氮时γ／a界面反向迁移所致。

Two surface heat-treatment processes, liquid nitriding and sulfurizing, are used to compare with the current production process of liquid carburizing, with other variables remaining constant.

两种表面热处理液体渗氮及渗硫工艺与现行生产上原采用之液体渗炭淬火处理工艺，在尽量保持其他可变数不变的情状下加以比较。

Results show that synthesizing AlN with introducing appropriate microwave synthesis nitriding process can not only dramatically cut time and cost, but also remarkably enhance synthesis quality.

结果表明，采用合适的微波合成氮化工艺合成AlN，不但在节能省时方面效果显著，而且在合成质量上也有较大的改善。

However, due to the precipitation of chromium nitrides in the nitrided case, conventional plasma nitriding usually deteriorate in corrosion resistance, which is unacceptable in many application situations involving severe corrosive attack by the environment.

然而由于氮化铬在氮化层中沉淀析出，在许多受环境严重腐蚀的应用场合，使传统的离子氮化耐腐蚀性能恶化，这是无法接受的。

The Nitrogen content distribution model of high temperature Nitriding can be inferred from atomic diffuse theory and Nitrogen layer hardness test result.

结合渗氮层硬度测试结果及原子扩散理论，推导出了无镍双相不锈钢高温渗氮层中氮含量的分布模型。

Because the liquid nitriding the liquid and the work piece direct conduction heating, reduced the work piece heating-up time, raised the azotize speed.

液体氮化由于液体与工件直接传导加热，缩短了工件加热时间，提高了渗氮速度。