parts的例句大全

In reference to mechanisms of peripheral muscle fatigue, the possible parts in which fatigue may happen were introduced respectively from the neuromuscular junction to the contractile protein of skeletal muscle.

有关外周疲劳机制，分别介绍神经肌肉接头至骨骼肌收缩蛋白等发生疲劳的部位。

30-50% electricity would be saved by using infrared baking compared with hot-air convection drying. Besides, infrared ray with its directional ability can be used to get the parts heated.

红外线烘干较电加热空气对流烘干可节约电力30%～50%，红外线具有方向性可用于零件局部加热。

The method to machine the parts made of stainless steel which adopts cooled air as coolant and a little plant oil as lubricant, is studied.

对采用冷风冷却微量植物油润滑切削加工不锈钢零件的方法进行了研究。

Likewise, a revolt against the status quo is just starting to gather steam in many parts of Asia and Africa.

一样的，对现实的反叛，也开始在亚洲和非洲的许多国家开始集聚能量。

Other parts add1/ 2 of the specified corrosion allowance on each side.

两个压力室的分隔部件，应对部件的的每侧提供一个腐蚀余度。

No corrosion allowance is required for such parts not in contact with the inside fluid as the outside surface of shell, skirt, support lugs and so on, except for anchor bolts.

对于不同内部介质接触的部件，如外表面、防护罩及支承凸缘等不需腐蚀余度，地脚螺栓除外。

The contact corrosion occurred between Ti or Ti-Alloy Parts and other metals in the aircraft structures is described in this paper.

本文叙述了飞机结构中钛及钛合金件与其它金属件之间所发生的接触腐蚀。

Please recognise that it is YOUR RESPONSIBILITY TO CHECK for proper tightness of fasteners and general function of the parts.

请承认，这是你的责任，以检查气密性的适当的紧固件和一般功能的部分。

Manufacturing of Coke Furnace Parts by Vermicular Graphite Cast Iron

采用蠕墨铸铁生产焦炉耐热部件

The equipments can cast aluminum alloy, stainless steel, copper, ductile iron, gray iron, vermicular iron and different conventional metal parts.

并且可以浇铸：铝合金、不锈钢、铜、球铁、灰铁、蠕铁等不同常规金属件。

Many parts are made of sheet metal in electric equipment, this framework can both decrease the weight of the electric equipment and reduce the cost of manufacture.

电子设备中许多结构零件都是采用金属薄板制成的，这种板式结构既可减轻电子设备的质量，又可降低加工制造的成本。

Both parts are combined by a capillary column connector. The separation principle for polar compounds was studied according to the separation efficiency ( such as the peak symmetry, width and retention time) of three groups of model compounds separated by six coupled columns with different polarities.

通过三组模型化合物在六种不同极性串联组合柱中的分离效果（包括色谱峰的对称性、峰宽、保留能力等），来研究串联柱对极性化合物的分离原理。

Gear coupling is the same number of teeth and the inner ring gear teeth of the flange half-band coupling and other parts.

齿式联轴器是由齿数相同的内齿圈和带外齿的凸缘半联轴器等零件组成。

Among the four the building hedges structure parts: Doors and windows, wall body, roof covering, the floor, the windows and doors heat insulation which is the main factors of the indoor thermal environment and energy-saving construction is worst.

在建筑围护结构的门窗、墙体、屋面、地面四大围护部件中，门窗的绝热性最差，是影响室内热环境和建筑节能的主要因素。

If you are a teenager living in certain parts of the province, you could be eligible for this program ．

如果你是居住在该省特定地区的青少年,你就有资格参加这个项目。

The program also parts of post-process functions including the random distribution of steel fibers in concrete matrix, structure shape map, discrete structure mesh map, structure displacement map, cracking map, stress map of steel bar.

程序也实现了部分后处理功能，包括钢纤维在混凝土基体中的随机分布、结构网格划分图、裂缝开展图和钢筋应力图等。

The crankshafts shown in Fig1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.

在图1-4中，曲轴实际上由以下不同的部分组成，它们分别是：主轴承轴颈、连杆轴颈、曲轴臂、轴承、平衡配量（？）以及飞轮端。

It consists of four main parts: external gear, internal gear, control board and crank.

该装置由内齿轮、外齿轮、控制板及曲轴四个主要零件组成。

If parts of the crank drive were replaced, you must determine the new cylinder-head gasket again by measuring the piston projection in "tdc" position.

如果曲柄传动的零件已更换，则必须测量活塞在“tdc”位置的突出部分以重新确定新的气缸垫是否恰当。

Stout erect perennial grass of northern parts of Old World having silky flowering spikes; widely cultivated for pasture and hay; naturalized in North America.

旧大陆北部多年生粗壮直立草本植物，绢状花穗；广泛培植，用作牧草和干草；已在北美落户。