resin的例句大全

Study on the Properties of High Oil Absorption Resin Consisting of Crosslinked Copolymer of Wood Fibre

木浆纤维素交联聚合复合高吸油性材料性能研究

The high oil-absorbing resin made of crosslinked copolymer of wood fibre and cetyl methacrylate was prepared by suspension polymerization method.

采用悬浮聚合法合成了木浆纤维素交联聚合复合高吸油性材料，测定了所制备的复合高吸油性材料吸油性能指标。

The apparent activation energy for adsorption of acid chrome blue K dye by crosslinked chitosan resin was found to be 26.095kJ/mol.

交联壳聚糖树脂吸附酸性铬蓝K染料的表观活化能为26.095kJ/mol。

The Influence of Resin Content on the Thermal Properties of Shell Mold Sand

树脂添加量对壳型覆膜砂热性能的影响

Study on Application of Macroporous Resin in the Determination of Apple Green in Food and Wastewater Treatment

大孔树脂在食品中果绿检测及废水处理中的应用研究

Initial study of the combined ability of artificial tooth and resin-injection base

人工牙与注塑基托结合力的初步研究

The theoretical calculation is done in detail for the paddle vibratory mixer type ZH 25 for cold setting resin sand, the ultimate oscillation Frequency of the vibratory mixer is determined by means of derivation from the formulas.

本文对自硬树脂砂叶片式振动混砂机进行了详细的理论计算，并通过公式推导确定了振动混砂机的极限振次。

A Study on Alcohol-Base Ti Slag Coating Used for Cold-Setting Furan Resin Sand Mould ( Core) for Heavy Castings

大型铸铁件呋喃树脂自硬砂型（芯）用醇基钛渣涂料的研究

Synthesis of The Functional Resin Using to Covalent Bonding to Protein

一种能与蛋白质进行共价键合的功能树脂的合成

Unsaturated polyester resin ( UPR) wastes pyrolysis was cracked to prepare feed stock, and process conditions of catalytic cracking reaction were introduced systematically.

对不饱和聚酯树脂（UPR）废料裂解制原料油技术进行了研究，系统地考察了催化裂解反应工艺条件。

A special photocurable acrylic cresol phenolic resin containing free epoxy group ( AAFEE) which can be dissolved in1% Na2CO3 was synthesized, it preparation conditions were studied in detail.

以含环氧基的光敏性丙烯酸酚醛环氧树脂为原料合成了一种可以在1%的碳酸钠溶液中溶解的光敏性酚醛环氧树脂（AAFEE），研究了该树脂的合成条件及工艺。

Recent development of O cresol novolac epoxy resin

邻甲酚甲醛环氧树脂的最新进展

Application of Super Water Absorbent Resin to Cultivated Crop in Droughty Conditions

保水剂在作物抗旱栽培中的应用

Development of Al_2O_3-SiC-C ramming mix bonded by phenolic resin for hearth of cupola furnace

冲天炉炉缸用Al2O3-SiC-C质捣打料的研制

Improving Properties of the Cured Product of Epoxy Resin with Boron-Amine Complexes

环氧树脂&硼胺络合物固化产物性能的改善

However, the high benzoxazine resin curing temperature, low cross-linking density of the cured product, brittle and other defects restrict its application in some special fields.

但是，苯并恶嗪树脂固化温度偏高、固化产物交联密度偏低、性脆等缺陷制约了其在一些特殊领域的应用。

TGA analysis showed that the cured product has a initial decomposition temperature and the end of temperature of 329.4 ℃, 417.5 ℃, which demonstrate that this new epoxy resin have good heat resistance.

用热重分析的方法分析了在此条件下固化产物的分解温度和终止温度分别为329.4℃和417.5℃，这表明所合成的新型环氧树脂具有良好的耐热性能。

The influence of oleoyl polyamine prepared by oleic acid and triethylene-tetramine on the properties of cured product of epoxy resin and methyhetrahydrophthalic anhydride ( MTHPA) was studied.

研究了油酸和三乙烯四胺的生成物油酰多胺对环氧树脂和甲基四氢苯酐固化物性能的影响。

The cured resin had good mechanical properties and moisture resistance.

在促进剂作用下，可以在125℃右固化环氧树脂，固化后的浇铸体有良好的力学性能和耐湿热性。

Cured resin has excellent properties in tensile strength and fracture resistance.

浇注体具有较高的拉伸强度，优异的抗断裂韧性。