screws的例句大全

Image Measurement on Internal Thread of Ball Screws

滚珠丝杠副内螺纹的图像测量

These screws have threads that cut hole and are made to fasten metal to metal.

自攻螺丝的螺纹会在孔内切割出内螺纹孔,然后锁紧两块铁板.

The workers were using a tap to cut the screws.

工人们正在用刻内螺纹的工具刻螺纹.

Remove the five screws that secure the battery tray to the vehicle.

拆下固定电池架到车身的五个螺丝.

The front end cover and the rear end cover are fixed by screws and rabbets. Meanwhile, the rotor assembly is fixed.

前、后端盖利用螺钉及止口固定，同时将转子总成固定。

This causes certain components as the spindle, drive gears, and feed screws to wear more rapidly.

这因素某成份,像是纱锭, 推进力以齿轮连起, 而且饲养扭紧更快速穿着.

The experiments of 8 full size cold-formed thin-walled C steel beam-to-column connections with self-drilling screws connecting.

8个足尺自攻螺钉连接的冷弯薄壁C型钢梁柱节点的试验。

He said he knew where he could put the screws on George.

他说他摸得着乔治的痛处,懂得如何对他施压.

For non-key way of plate cylinder screws must be tightened up.

差于无键槽的印版滚筒,螺丝一不退给拧紧.

If one of the camshafts cannot be locked, loosen all the fastening screws on the affected camshaft sprocket by about one turn.

如果有一根凸轮轴无法锁定，则松开相应凸轮轴链轮上的所有紧固螺钉（旋转一圈左右）。

Place bobbin winder 3 in the belt cover, and position it so that it does not contact the machine arm or the belt cover before fixing it with wooden screws.

把绕线装置3放到皮带护罩里，调整到不接触机架和皮带护罩的位置，然后用木螺丝进行固定。

Step 4 : Unscrew the four cover screws.

步骤 四: 松开上盖的四颗螺丝.

Assembly tools for screws and nuts. Square drive sockets. Part 1: hand-operated sockets. Dimensions.

螺钉和螺母用装配工具. 方形传动套筒. 第1部分: 手动套筒. 尺寸.

Horizontal extruder can be raised or lowered using hydraulic screws for fast . accurate positioning.

水平射座升降以油压马达导螺杆驱动,调整迅速精确,模具合模线尺寸限制小,适用范围广泛.

None of these 2 screws was associated with clinical sequelae.

2颗螺钉均为带来临床后遗症.

Check whether screws loose on the induction power unit, power distributor cabinet, transformer and induction coil.

检查中频、控制柜、变压器和感应线圈上的螺丝是否不牢固。

He referred obliquely to various implements of torture including thumb screws and the Billy Ray Cyrus single "Achy Breaky Heart. "

他提到的各种实施酷刑的手段，其中包括拇指螺丝和BillyRayCyrus的单曲“AchyBreakyHeart”。

Method 50 dry samples of atlas and the projection and direction of screws were measured with vernier calipers and protractors.

方用游标卡尺和量角器对50例干燥寰椎标本的后弓进钉点及进钉方向等相关参数进行测量。

Tighten the camshaft housing screws in the sequence shown.

按照所示顺序，拧紧凸轮轴室螺钉。

Tighten central screws on the sprocket and camshaft controller to the prescribed final torque using a torque angle wrench.

用扭力角度扳手将链轮和凸轮轴控制器上的中央螺钉拧紧至规定的最终力矩。