sintering的例句大全

Qualitative and Quantitative Theory of Enhanced Sintering in Powder Metallurgy

粉末冶金强化烧结的定性与定量分析理论综述

The special results of BaTO 3 ceramics ( BTO ) are presented by microwave sintering.

本文报道了微波烧结BaTiO_3陶瓷的初步研究结果.

The effects of donor doping amount, cooling conditions after sintering and oxidation temperatures on the semiconductivity of SrTiO_3 have been studied.

研究了施主掺杂量，烧成后的冷却条件、氧化温度对SrTiO3半导化的影响。

Common donor dopants are Y 3+ and Nb 5+ Usually donor doped content lies in range from o 2 to 0 3 percent Factors influencing on the content are purity of used raw materials, flux for sintering, donor doping process and the others.

常用的施主加入物是Y3＋和Nb5＋，施主掺入量一般控制在x＝0.2%～0.3%为宜。影响施主掺入量的因素有原料纯度、烧结助剂、掺入施主的工艺等。

The multiple component sintering additive can also play double effects during preparing BN/ AlN composites, and plays important role on promoting densification process and improving property.

复合烧结助剂在制备BN/AlN复相陶瓷过程中同样可起到双重效果，对促进材料的致密化和改善材料性能起到了重要的作用。

This is closely related with self diffusion and mutual diffusion of its components during sintering.

合金性能的变化与烧结过程中组元的自扩散和互扩散密切相关.

Excessive sintering aids could lead to glass state material separating out and dielectric constant decreasing.

过量的助烧剂会导致玻璃态物质析出并使介电常数减小.

In addition, the successful development of a new sealant has tackled the sintering problem of diffusion agents at high temperatures and the quality and performance of diffused layer of steel are greatly improved.

研究了一种封闭剂，重点解决了渗剂高温氧化烧结问题，使渗层质量优良、性能稳定。

It includes the following procedures: canning with nitrided steel powder → sintering → sealing the can → forging.

它包括含氮粉末准备→装粉→烧结→包套焊封→自由锻造等技术措施。

Continuous carbonation decomposition ( CCD) is one of the key procedures in sintering process of alumina production, its decomposition ratio gradient and the last-tank decomposition ratio directly affect the quality and yield of products.

连续碳酸化分解（简称连续碳分）过程是烧结法生产氧化铝的关键工序之一，其分解梯度与末槽分解率直接影响产品的产量和质量。

The results showed that: ( 1) TiO2 promoted the sintering of chromic oxide by Ti4+ replacing Cr3+, which restrained the formation of high volatility chrome cation through forming chrome cation vacancy, and therefore caused lattice distortion and increased Cr3+ diffusion rate.

试验结果表明：（1）TiO2通过Ti4+置换Cr3+，抑制了高挥发性铬离子的形成，产生了铬离子空位及引起晶格畸变，增大了Cr3+扩散速率，从而促进了Cr2O3材料烧结。

Moulds made of natural graphite powder have been studied. Using fly ash as the main material along with a proper quantity of clay and admixture, the experiment is conducted to produce Lytag through sintering the mixture.

采用天然石墨粉无粘结剂冷压成型方法制作的模具有一定的机械强度，可应用于粉末冶金工艺。本实验以粉煤灰为主要原料，适量添加粘土及外加剂，用烧结法制备粉煤灰陶粒。

Extraction of aluminium and iron from boiler slag by sintering

用烧结法从沸腾炉渣中提取铝和铁的研究

Fuzzy logic BTP control of No.1 sintering plant in WISCO

BTP模糊控制技术在武钢一烧的应用

Influence of Al BSF Sintering in the RTP on the Minority Carrier Lifetime

RTP工艺中铝背场吸杂对硅片少子寿命影响的研究

Effect of Different Doping Method of Sintering Additive on Properties of BNT Ceramics

烧结助剂引入方式对BNT陶瓷性能的影响

Analyzing the structure of BFT flexible gearing of 400 m~ 2 sintering machine in Handan Iron& Steel Company

邯钢400m~2烧结机系统单辊破碎机BFT柔性传动装置结构分析

Research on Microwave Sintering Technology of Cermet Material

微波烧结金属陶瓷材料的工艺研究

The technical re formation of bell-type pressurized sintering furnace forfabricating powder metallurgy friction materials is reviewed.

叙述了粉末冶金摩擦材料加压烧结用设备钟罩 式 加压烧结护的技术改造.

The sintering temperature of 3 Y-TZP powders can be decreased significantly by the addition of glass powder.

在3Y-TZP粉料中直接加入玻璃粉,可显著降低材料的烧结温度.