sintering的例句大全

TiB 2-Al 2 O 3 Multiphase ceramics with Y 2 O 3-La 2 O 3 as sintering aids are fabricated by hot pressing.

本文以Y2O3-La2O3为烧结助剂,通过热压烧结制备了TiB2-Al2O3复相陶瓷,研究了原料组成对材料的显微结构和力学性能的影响.

It is found that there is no welding sintering behavior due to friction between nanometer ceramic particles during explosive consolidation. This result can be used to judge the theory of the ECCP. 2.

通过研究发现，纳米陶瓷粉末颗粒在爆炸压实的条件下，不可能发生由于摩擦导致焊接的烧结行为，从而为爆炸压实烧结纳米陶瓷粉末的理论进行了澄清。

Discussion on the Paths for Increasing the Evaporative Capacity of the Sintering Process System

浅议提高烧结法系统蒸发产能的途径

Dynamic sintering and digest of crude material with low al/ si ratio& its test

低铝硅比生料动态烧结和溶出试验研究

The Development of Model ZSD 50 High Vacuum Ta Sintering Furnace

ZSD－50型高真空钽烧结炉的研制

After liquid phase sintering, the WCu composites have been deformed by hot hydrostatic extrusion and subsequent hot extrusion, during which the plastic deformation of tungsten particle is not obvious.

通过对W-40wt%Cu液相烧结坯进行一次热静液挤压和后续的热挤压变形的实验，发现钨铜材料在一次挤压和二次挤压后，其钨颗粒并没有明显的大的塑性变形。

The biphasic ceramics composed of PZN based and BT based constitutes were prepared by two phases mixed sintering method.

用两相混合烧结法制备了PZN基和BT基复合的复相陶瓷。

The experiment results indicated that the complete perovskite structure is obtained when the sintering temperature is about 1200 ℃ of the PCZ ( 0.33) ceramic prepared by solid oxide.

实验发现，用固相法制备的PCZ（0.33）的陶瓷在1200℃左右烧结时可以得到的完全钙钛矿相。

A Study of Atmosphere Sintering Technique for KTN Ceramics by Sol Gel Method

用Sol-Gel法制备粉料及KTN陶瓷烧结研究

The exhaust system draws out the dust and harmful gas in sintering process.

钢铁厂的铁矿烧结车间用抽风系统将生产过程混入空气中的粉尘和有害气体抽走.

Sintering temperature has also great influences on fracture characteristic and properties.

烧结温度对断口形貌和力学性能也有较大影响.

This paper analyzes application of long bag pressure pulse filter in cement, electric steelmaking and sintering.

客观详实地介绍和分析了长袋低压脉冲袋式除尘器在水泥 、 电炉炼钢、烧结行业除尘系统中的应用状况.

Solidcircuit breaker This production is that copper-tungsten and copper bar as one through casting sintering.

本产品采用烧结熔铸的方法将粉末冶金铜钨合金与铜棒融为一体.

Cerium-tungsten and AIN ceramics pieces with high density were obtained by the hollow cathode plasma sintering.

空心阴极烧结工艺可制备出致密度高,导热性能好的AIN陶瓷和较高致密度的铈钨样品.

Research and Practice of Updraught Sintering Technique for Lead Concentrate

铅鼓风烧结技术的研究与实践

Research and Practice on Lead Updraught Sintering with Oxygen-enriched Air

富氧鼓风铅烧结焙烧研究与实践

Metal Injection Molding, One step Vacuum de-wax sintering process, Powder metallurgy monthly.

1金属粉末射出成型真空一次 脱蜡 烧结法, 粉末冶金月刊.

The microcosmic effects of sintering temperature and calefactive velocity on alumina

烧结温度及升温速率对氧化铝玻璃复合体的微观影响

The sintering calefactive system was made by the TG-DSC curve analysis. Surface morphology analysis was performed with scanning electron microscopy.

利用TG-DSC曲线分析制定烧结升温制度，采用扫描电镜观察多孔陶瓷表面形貌。

Also give the performance of the high vacuum sintering pressurized furnace and practical measured data.

给出了该系列高真空正压烧结炉的性能和实际测试指标.