strength的例句大全

The community-based housing support is matched with our tradition and conditions and strength.

实行社区居家养老与中国的传统和国情国力比较符合,是适合中国城市老年人的养老新方式.

The load carrying capacities of deck concrete composite slabs are governed by the longitudinal shear strength.

压型钢板-混凝土组合楼板的承载能力受楼板叠合面的纵向抗剪能力控制.

The increase of the strength and toughness of SiC_p/ MoSi_2 composites is mainly attributed to the refinement of MoSi_2 grains, dispersion strengthening of the SiC particles and elimination of the brittle SiO_2 glass phase.

SiC p/MoSi2复合材料强韧性的提高主要是由于晶粒细化、SiC颗粒弥散强化以及脆性SiO2玻璃相的减少和消除。

The residual deleterious elements in steel lead to products occurring red brittleness surface crack and temper brittleness, and lead to hot strength of heat resistant steel decreasing.

钢中的残余有害元素致使钢材产生红脆性表面裂纹和具有回火脆性倾向，并使耐热钢的热强性降低。

In applying hot briquetting for ISP dross processing, influences of pressure, temperature, time of pressing on strength of hot briquetes have been examined.

在用ISP法冶炼浮渣热压团时，研究了压团压力、温度、加压时间对铅锌密闭鼓风炉冶炼浮渣热压团块强度的影响。

The effect of additive amount of biomass and fat coal, briquetting pressure, coal sizes distribution, heating velocity of the carbonization process on the strength of formed coke were examined.

研究了生物质配入量、肥煤配入量、成型压力、煤料筛分组成、炭化加热速度对型焦抗压强度的影响。

In addition, characterization of particle group, briquetting pressure, water content and upgraded coal content were the major factors that affect briquette strength.

颗粒群特性、成型压力、水分含量和提质煤混合比例是影响型煤强度的主要因素。

Analysis on Some Factors Influencing Coal Briquette Strength

影响工业型煤强度的因素分析

Strength Test& Analysis of Bridging Beam at Qinling Power Station, Unit 5

秦岭电厂5号机横梁强度测试及分析

Approach Discussion Improving Strength of Galvanized Wire for Bridge Cable

提高桥梁缆索用镀锌钢丝强度途径的探讨

In order to meet the technical requirement of breech ring blank, the past single piece forging for high& mid-strength steel breech ring blank was changed into multiple length forging.

在满足炮尾毛坯锻件技术要求的前提下，采用倍尺锻造法和直接拔长工艺代替传统的单件锻造工艺。

There was a significant difference of breaking strength and strain of break of hair fibers between dry and wet state.

干态与湿态下头发断裂强度、断裂伸长率之间的差异具有统计学意义。

Results showed that with the increase of flame retardant additives, the breaking strain, tensile strength and elongation at break declined, but the elasticity modulus increased.

结果显示：随阻燃剂添加量增加，体系的扯断应变、拉伸强度、断裂伸长率下降，弹性模量增大。

The young's modulus, strength and breaking strain of carbon materials

炭素材料的弹性模量、强度和破坏变形率

The paper strength was good, breaking length was only 0.8% lower than that of control pulp.

裂断长仅比对照样低0.8%，成纸强度好；

Therefore Vertical WEDM with Rotation Wire can enhance the bending strength of the wire electrode and reduce the vibration of wire electrode so as to prevent the happening of filament breakage.

因此，立式回转线切割可以提高电极丝的抗弯强度，降低电极丝振动，从而降低断丝现象的发生。

Joint strength and fracture analysis of arc brazing with Cu based filler metals

Cu基钎料电弧钎焊接头强度及断口分析

When the brazing temperature exceeded 650 ℃, the tensile strength decreased.

温度高于650℃，抗拉强度降低；

As the brazing temperature increased, shear strength of the joints increased and then decreased.

在本研究的范围内，随着钎焊温度的升高，接头剪切强度表现为先升高后降低的趋势。

The shearing strength of the brazed joint can be also greatly strengthened.

同时还可以显著提高钎焊接头的抗剪切强度。