surface的例句大全

Therefore, In allowing water resistance range, Parallel-flow heat exchanger can improve heat transfer efficiency and will be better choice for surface cooler in dry conditions through the reasonable multipaths designed.

因此，在允许水阻范围内，通过合理多流程设计，平行流换热器用于干工况作表冷器可以实现强化换热。

Design and Check Calculation of Surface Air Cooler Based on Excel

基于Excel的水冷式表冷器设计和校核计算

Objective To compare the protective effects of mild hypothermia induced by extracorporeal blood shunt cooling or surface cooling on brain after resuscitation from cardiac arrest.

目的评估和比较体外血液冷却和体表降温形成亚低温对兔心肺复苏后的脑保护作用。

Then the molecular imprinted polyethyleneimine on the surface of silica gel was prepared using Cu~ 2+ as template ions and epichlorohydrin ( ECH) as crosslinking agent via coordination bond effects, and composite ionic imprinted material IIP-PEI/ SiO_2 was obtained.

以Cu2+为模板离子，以环氧氯丙烷为交联剂，通过配位键作用，对化学键合在硅胶表面的PEI大分子链进行了离子印迹，制备了复合型Cu2+印迹材料IIP-PEI/SiO2；

( iii) a coordination bond, formed by ammonia atom with a surface cation ( Lewis acid site).

与催化剂表面的阳离子（即表面Lewis位）形成共价结构。

A new process of rubber covering on the surface of nickel is given.

提出了将底胶涂于镍表面的涂胶新工艺。

This paper describes the distribution of surface hardened layer and analyses of the residual stress in the nodular graphite cast iron crank shaft with its Journal and arm corner hardened simultaneously by high frequency induction heating.

本文叙述了对球墨铸铁曲轴轴颈与园角部位同时高频淬火后获得的硬化层分布，以及硬化层中残余应力分析。

A new technique by computer has been used to trace fatigue growth of surface crack of out corner of cylindrical pressure vessel nozzles by using the methods of 1/ 4 displacement and finite element.

运用1/4点位移法和有限元技术对圆筒型容器接管外拐角表面裂纹扩展时应力强度因子的变化作了计算机数值跟踪。

Finite Element Method to Tracing the Fatigue Growth of Surface Crack of Out corner of Cylindrical Pressure Vessel Nozzles

圆筒型容器接管外拐角表面裂纹疲劳扩展的有限元跟踪

The Measures for Delaying the Map-cracking on the Surface of the Cast Roller

延缓铸轧辊面龟裂的措施

In order to ensure solid motor with cracked grain to be successfully launched, the strain and stress concentration at the tips of crack should be released by shoveling slot on the crack of grain surface.

工程实际中通常采用于药柱表面裂纹处铲槽的方法来释放裂纹尖端的应力应变集中，以确保药柱含裂纹的固体发动机能正常点火发射。

Analysis on Destroy Effect of Horizontal Force on the Cracked Asphalt Pavement Surface Layer

水平力对含裂纹沥青路面面层破坏的影响分析

PU sub-coating substrate ; durability, good surface flexibility, used for inkjet printing film.

聚氨酯涂层; 耐候性好,表面柔性较好, 用于生产喷墨打印片等.

When the fibre placement is finished, the tows cover the surface all over, no stacking and detaching.

铺丝完成时，丝束“包裹”整个曲面，无堆叠和分离现象。

When flow velocity reaches 2.62 m/ s, the local corrosion is pitting corrosion and the protective corrosion product film can not form on the test coupon surface at the temperature of 100 ℃ and the CO_2 pressure of 0.03 MPa.

在流体速度为2.62m/s的情况下，温度为100℃、CO2分压为0.03MPa时，发生的局部腐蚀主要为点蚀，试样表面未能形成保护性腐蚀产物膜；

These modes, in which optical fields are coupled to electron oscillations, are usually called surface plasmons ( SPs).

这种将光场与金属中的电子耦合起来的电磁模式被称为表面等离子体。

In this paper, the properties of universally coupled surface electron, Which is coupled both with SO BO and SA phonons are studied.

本文同时考虑体纵光学声子、表面光学声子以及表面声学声子的影响，研究半无限晶体中与声子普适耦合的表面电子的性质。

Based on the full analysis of the fields of the present research on the reverse engineering with home and foreign documents, this paper takes the wax model of Coupler knuckle lock as the object to do some in-depth research about the reverse engineering of complicated surface products.

本文在全面分析国内外逆向工程领域研究现状的基础上，以钩锁铁蜡模样件作为应用对象，对复杂曲面产品的逆向设计进行了深入研究。

Application of Surface Granosealing Technology on Oil Pipe Coupling

表面磷化处理技术在油管接箍上的应用

From these results, the potential function, which contains both ionic and covalent interaction, was established. In order to fit the parameters of the potential function, and the energy surface of these systems was constructed by energy simulation.

基于此，本文建立了能同时反映离子型与共价型相互作用的势函数，并通过体系总能量模拟建立的势能曲面拟合了其他参数。