surface的例句大全

Oven for Surface Drying of Furan-Bonded Sand Moulds

树脂砂型表面干燥炉

The ink with the acid-modified o-cresol formaldehyde epoxy acrylate as the main body is of good surface drying property, whose resolution achieves 50 μ m;

以酸改性邻甲酚醛环氧丙烯酸酯为主体配制的油墨具有较好的表面干燥性，其分辨率达50μm；

Experimental Research on Surface Drying Characteristics of Synthetic Fibre and Cotton Fabrics

合成纤维和棉织物表面接触干燥特性的实验研究

The relations between the time of surface drying and the quantity of curing agent was established.

测定了固化剂用量与涂膜表干时间的关系，表干时间随固化剂用量的增多而减短。

Film's surface drying time is about 30 min, and actual time is about 36 h.

所得涂膜的表干时间约为30min，实干时间约为36h。

The waterborne epoxy coating has long pot life about 6 h and short surface drying time about 1 h.

表干时间较短，一般在1h左右；

Film properties including surface drying time, luster value, shock strength, adhesion and flexibility were tested according to standard methods for coating.

同时用涂料标准方法测定了这些样品的漆膜的表干时间、光泽值、冲击强度、附着力、柔韧性等。

Mineral matter in coal is the primary cause for ash deposition in heating surface of boiler.

矿物质是引起锅炉受热面灰沉积的根本原因.

The wettability between the glass and dumet wire depends on both the cleanliness and constitution of surface layer and the heating conditions.

玻璃与杜美丝的润湿性决定于表面层的净化程度和构成及加热条件。

This paper introduced the research about the micro structure and the properties of the surface layer and the ferronickel core-copper clad boundary layer of dumet wire by means of AES 、 WDS and x-ray diffraction.

利用AES、WDS和x－射线衍射等方法，研究了杜美丝表面层、铁镍芯与覆铜层界面的微观结构与特性。

Research on Algorithm of Auto-adding Aided Surface in MCNP Modeling

蒙特卡罗仿真建模中自动添加辅助面的算法研究

The Microsoft Surface just got a whole lot more wicked awesome.

微软表面上只是得到了一大堆更邪恶的东西。

In addition, back in 2001 - long before the iPhone launch - Microsoft began work on Microsoft Surface, a touchscreen tabletop computer.

此外，回到iPhone推出很久之前的2001年，微软已开始研究MicrosoftSurface，一种触摸屏电脑。

Requirements of purity degree , surface quality and microstructure for steel for cord arc strict.

帘线钢对纯净度 、 表面质量、金相组织等要求十分严格.

On the paper surface quality play an important role.

对提高纸板表面质量和档次发挥着重要作用.

Finally, control system of surface quality for rolled and plate was proposed.

最后, 提出了铝材轧制表面质量的控制系统.

Therefore productivity and surface quality is user dependent.

因此,生产力和表面质量是用户的依赖.

It's an urgent need for industrial development nowadays to improve the surface quality of the casting.

提高铸件表面质量是当今工业发展的迫切需要.

As a result, high speed milling parameter can achieve better workpiece surface quality.

实验表明, 高速铣削能够获得较好的工件表面质量.

By hot runner system, the surface quality and moulding efficiency of plastic parts are improved.

分析了注射模结构的设计过程,采用热流道系统, 提高了塑件表面质量及成型效率.