velocity的例句大全

Understanding Work Expression and Using Galilei Variable Velocity Correctly

正确认识做功公式和应用伽利略速度变换

Change in subducting velocity;

俯冲速率的改变；

Analysis of the Effect of Velocity Delay Compensation Parameters on Photo-Electric Servo Systems

速度滞后补偿参数对光电伺服系统的影响分析

A Study on Technical Modification of Control Method of Velocity Curve for Dongyang Elevator

东洋电梯给定速度曲线控制方式的技术改造研究

Minus one equals the total velocity of red dwarf.

等于红矮人号的完全速率。

The result indicates that outlet velocity and outlet diameter have obvious effect on air distribution.

模型试验结果及其分析研究表明，送风速度和送风口直径对工作区空气分布有很明显的影响。

Feed velocity had no obvious effect on solvent flux.

进料速度对溶剂透过率没有太大的影响。

The authors propose a migration velocity analysis method based on a global optimization.

提出用全局最优化偏移速度分析方法求取介电常数分布.

Special relativity is all about high-velocity motion.

通常我们只会把狭义相对论和高速运动联想在一起.

Since velocity and density generally increase with depth , the reflection coefficient is usually positive.

因为速度和密度一般是随浓度而增加, 故而反射系数通常为正值.

The result gave the optimal filter particle diameter, layer thickness and filtration velocity.

根据实验结果,确定了最佳的过滤介质粒径 、 过滤层厚度和过滤速度.

The mean wake velocity profiles behind tandem cascades self-similarity, similar to that behind the single-row cascade.

串列叶栅的尾迹平均速度和紊流脉动速度沿额线方向比单列叶栅变化平缓.

The Fire-grate Velocity Control System and Control Devices of the Hot Water Boiler

热水锅炉炉排速度的控制装置与控制系统

The method to analyze the pressure gradient with mean radial velocity is used.

本文提出了利用平均径向速度分析压力梯度的方法。

Use a higher primary wind velocity to increase its jet flow rigidity;

采用较高的一次风速来提高一次风射流刚性；

It is difficult to simulate a velocity profile with the traditional least square method.

摘要传统的最小二乘法拟合流速剖面存在一定的困难.

The shearing field is a field that has velocity grades along vertical direction of fluids flow.

剪切流场是一种垂直于流体流动方向且具有速度梯度的流场.

Distribution of removed material in Fluid Jet Polishing ( FJP) was investigated in experiments. The characteristics of fluid velocity and pressure on the sample surface were simulated using Finite Element Method ( FEM) when the fluid jet impacts the work piece.

实验研究了液体喷射抛光技术的材料去除量分布特征，并利用有限元分析方法，分析了抛光头（液体柱）与工件表面相互作用时流场的分布特点。

Filter aids such as HTK, GLF can speed up the filtering velocity and bring down the specific resistance, making the filter cake much regular and massy.

当添加助滤剂HTK、GLF后都能在一定程度上加快过滤速度、降低过滤比阻，使滤饼的成型更有规则、坚实，但是改善程度比较有限。

The results show that the strain velocity mainly affects maximum principal stress.

研究结果表明,应变速率等因素对最大主应力的变化有一定影响.