wear-resistance的例句大全

The erosive-corrosive wear ( ECW) test of a slurry-pot type is a test method often used for investigating and evaluating the ECW resistance of an alloy or surface modified layer.

应用浆罐式冲刷腐蚀磨损试验考察和评价了合金或其表面改性涂层的抗冲蚀性能。

Products are wear-resistant, pressure, bending resistance, Naisuan Jian, and network formation of beautiful, high quality finish.

产品具有耐磨 、 耐压 、 耐弯曲 、 耐酸碱, 和网面平整美观, 光洁度高等特点.

Research on Wear Resistance of Cermet Cladding Material

金属陶瓷硬质涂覆层材料耐磨损性能研究现状

Tungsten carbide/ cobalt cermet coatings deposited by thermal spraying have been widely used in various areas to enhance the wear resistance of many types of engineering components.

热喷涂传统碳化钨/钴金属陶瓷作为耐磨涂层已得到广泛的应用。

Hardness property and wear resistance of al_2o_ ( 3p)/ Zn-Al composite

Al2O（3P）／Zn－Al复合材料的硬度与耐磨性能

ER 5 is a cold work die steel with high wear resistance and toughness.

ER5是一种高耐磨冷作模具钢.

Effect of laser scanning speed on phase constitution, microstructure, microhardness and wear resistance of laser-cladding stellite hard facing alloy by using of across-flow-stype CO_2 laser of power 1. 5 kW has been investigated.

本文报导应用横流式连续CO2激光器，采用不同激光扫描速度，对熔覆Stellite12钴基硬面合金的合金层的相组成、微观组织结构对耐磨性和显微硬度影响的研究结果。

The results show that the wear resistance and hardness of coating can be enhanced by Ni based alloy coating added with SiC.

结果表明，添加SiC的镍基合金涂层能够提高熔覆层的耐磨性和硬度。

The Polycrystalline diamond ( PCD) has been applied widely in industrial fields as a new cutting tool material of high hardness and good wear-resistance. This thesis designed a type of PCD groove cutter by means of piston ring groove function.

随着聚晶金刚石（PCD）刀具材料在切削铝合金上的广泛应用，本文根据活塞环槽的性能要求及铝合金的切削特点，确定了PCD槽刀几何角度，设计了PCD环槽成型刀具。

Study on Wear Resistance of Composite Alloy Reinforced with Hard Alloy Grains for Coal Crusher

磨煤机用硬质颗粒增强复合合金材料的耐磨性

Steel tooth bit can increase the bit's stability and lower the tooth impact load, and enhance its wear resistance.

钢齿牙轮钻头增强了工作的平稳性，降低了牙齿的冲击载荷，使牙轮钻头的耐磨性能得到提高；

The results show that in the case of the same cutting resistance, pick-shaped teeth enjoys advantages over knife-shaped teeth, as a result of it better combined performances, such as freedom of fragment, the lower tooth cost and wear-proof.

结果表明：在截割阻力相同的情况下，镐形齿具有不易被击碎、齿耗低、耐磨等优点，其综合性能优于刀形齿。

To enhance thermal-wear resistance of the mandrel, it is required to use mandrel material which has dispersed carbide, linear expansion factor of the base metal close to that of the chide film, minimum elastic modulus and maximum thermal conductivity factor.

为了提高芯棒的抗热损伤性能，应使芯棒材料的碳化物弥散化，基体金属与氧化膜的线胀系数相接近，弹性模量尽量低，热传导系数尽量高。

The oxygen& acetylene flame spray welding technology is applied to strengthen the surface of the rotor blade of the adjustable rotor blade axial flow fans for raising its wear resistance.

采用火焰喷焊技术对动叶可调轴流式风机动叶片进行表面强化，可以显著提高其耐磨性。

Wear Resistance Tests of Hard Anodic Coating on Aluminum Alloys

铝合金硬阳极化膜的耐磨试验

The coating the wearing surface of andanti-wear layer with high surface hardness and excellent corrosion resistance.

膜层硬度高、耐磨性好,具有较优良的综合性能,解决了表面修复的难题.

The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.

切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。

Megadyne belts for knitting machine drive are manufactured in Polyurethane with high wear resistance and high tensile steel& kevlar cords tension member.

圆筒针织机聚氨酯同步带耐用性强及不会容易磨损，分别有钢丝芯及线芯。

LIU Jia-jun. Wear principles and resistance of materials. Beijing: Tsinghua University Press, 1993.

刘家浚. 材料磨损原理及其耐磨性. 北京: 清华大学出版社, 1993.

It was found that nano-Al 2O 3 improved the wear resistance of monomer casting polyamide with the optimal content of nan o-Al 2O 3 being 3 wt%.

分析结果表明：纳米Al2O3填料可提高单体浇铸PA6的耐磨性，其含量在3%左右时增强效果最好；