weld的例句大全

Mirror the model over, weld the middle points, and then remove the middle edge ( Fig . 09 ).

镜像模型, 焊接中间的点, 然后移除中间的线.

She has both the authority and the personality to weld the party together.

团结全党所需的权威和个人魅力她两者兼具。

Longitudinal contraction deformation: The component contracts in the weld direction after welding.

纵向收缩变形: 构件焊后在焊缝方向上发生的收缩.

Introduced here is the cored down weld technology.

介绍了药芯焊丝自保护下向焊技术.

Expert System for Ultrasonic Testing of Fillet Weld on Boiler Header

联箱管座角焊缝超声检测专家系统的开发

A hole in weld can be detected by feeling for a hot spot on the mold.

一个洞,在焊缝可以侦测到的感觉一个热点在模具上.

Site Repair Cracks In The Weld on Link Pipe Between Ammonia Synthesis Tower and Waste Boiler

氨合成塔与废热锅炉连接管焊缝裂纹的现场修复

Therefore, it is necessary to reasonably decreasing the cool rate after welding process for improving the ability of anti-fatigue crack initiation in the weld heat affected zone. 5.

因此在焊接时适当地降低热影响区的冷却速度，可以使焊接热影响区获得更优的抗疲劳裂纹萌生能力。

It has stable arc combustion, good slag detachability and a good a appearance of weld.

电弧燃烧稳定, 脱渣容易,焊缝成型美观.

Effect of Working Conditions on the Sliding Draw Process of Copper-clad Weld Wire

工况条件对铜包钢线滑动拉拔过程的影响

Technological experiment of manufacturing copper clad weld wire with extrusion method

铜包钢复合线材的挤压成形工艺试验

Study of Continuous Extrusion Process for Producing Tin Brass Weld Wire

锡黄铜焊丝连续挤压工艺研究

The text summarized components, properties and application of YM-1 non-vulcanization type spot weld sealant.

概述了YM-1非硫化型点焊密封剂的组份 、 性能与应用,为YM -1 非 硫化型点焊密封剂的应用提供了使用依据.

Therefore, reasonable design of the TWB and the rational choice of the forming process parameters could not only avoid the defects like cracking and wrinkling, but also control the weld-line movement distance and improve the stamping formability of the TWBs.

拼焊板的合理设计以及成形工艺参数的合理选用能够避免折线焊缝拼焊板冲压成形过程中的起皱和拉裂等缺陷，并能控制焊缝的移动量，提高拼焊板的冲压成形性能。

An experimental research on the LB TRC test for cold crack susceptibility of weld metal for high strength steels

高强度钢焊缝金属LB-TRC冷裂缝试验法的研究&对影响试验结果的因素的探讨

The researches on space materials vacuum effect in China are described. The effects of cold weld for space materials and moblie parts and the effects of molecule pollution on the long life and the reliability of spacecraft are indicated.

概述了中国空间材料的真空效应研究现状，并指出空间材料、活动部件的冷焊及航天器敏感表面分子污染对航天器的长寿命和可靠性的影响。

Process and equipment needed including aluminium ( alumnus alloy) continuous casting and rolling, aluminium continuous extrusion, continuous wire drawing, cold press weld and wire stranding;

对工艺技术与装备：铝（铝合金）连铸连轧、铝连续挤压、连续拉线、冷压焊和绞线；

Practical Analyzation on Working on the Drum of Flat Rotary Curing Press with a Method of Complete Cold Winding Weld

用整体冷卷焊接法加工平带鼓式硫化机鼓体的实用分析

The size of beam spot of EBW is important factor which affects weld configuration.

电子束焊接焦点的大小是影响焊缝成型的重要因素.

Mn is added into Al Si alloy containing Fe, then cast into sample and weld wire.

在含Fe的Al-Si合金中加入Mn元素，铸成试样和焊丝。