weld的例句大全

Effect of Working Conditions on the Sliding Draw Process of Copper-clad Weld Wire

工况条件对铜包钢线滑动拉拔过程的影响

It has stable arc combustion, good slag detachability and a good a appearance of weld.

电弧燃烧稳定, 脱渣容易,焊缝成型美观.

Therefore, it is necessary to reasonably decreasing the cool rate after welding process for improving the ability of anti-fatigue crack initiation in the weld heat affected zone. 5.

因此在焊接时适当地降低热影响区的冷却速度，可以使焊接热影响区获得更优的抗疲劳裂纹萌生能力。

Site Repair Cracks In The Weld on Link Pipe Between Ammonia Synthesis Tower and Waste Boiler

氨合成塔与废热锅炉连接管焊缝裂纹的现场修复

Expert System for Ultrasonic Testing of Fillet Weld on Boiler Header

联箱管座角焊缝超声检测专家系统的开发

Development of Covered Electrode for High Strength Steel and Its Technology Test of Weld

高强钢焊条的研制及焊接工艺试验

Basic flux-cored wire for backing weld to T91 tube was studied in this paper.

研究了用于T91钢管打底焊的碱性渣系药芯焊丝。

The Development of An All-Position Automatic Welder with STT Technology for Pipe Backing Weld

STT全位置自动打底焊机的研制

Investigation into Backing Weld Procedure Technique of All-position Narrow Gap and Thick-walled Pipe Welding

管道全位置焊接打底焊工艺研究

Progress in backing weld technology for stainless steel tubes

不锈钢管打底焊接工艺的进展

Dual-Metal Hard Facing Heap Weld Technology of Recovering Hot Forging die

修复热锻模的双金属堆焊技术

The weld repair technology was introduced for crosshead of driven end of Φ 400mm roll. The rolling amount can reach 3.6 × 10~ 4t after the roll repaired.

介绍了Φ400mm轧辊传动端十字头磨损后焊接修补的工艺，修复后轧辊的轧制量能达到36万t。

Forecast for Formula of Covered Electrode Based on Composition of Weld Line

基于焊缝成分的焊条配方预测

Design of Weld Tracking Self-Adaptive Fuzzy Controller in Consumable Electrode Arc Welding

熔化极电弧焊焊缝跟踪自适应模糊控制器设计

Microscopic study of the bond in G zone of ni-sta in less steel explosive weld in G composite plate

镍-不锈钢爆炸复合板结合区的显微研究

This paper analyzes the cause of producing small concave around weld seam according to practice of welding long rail in Guangzhou Metro Line 2, and presents the preventable measure to overcome.

本文结合广州地铁二号线接触焊焊接长钢轨实践，分析了焊缝热影响区产生轨面小凹痕的原因，提出克服此类缺陷的预防措施，可供类似工程借鉴。

The Optimization Analysis of Weld Residual Stress for Head Conduit

压力管道焊缝残余应力的优化分析

Weld County Commissioner Sean Conway is a third generation Coloradan.

威尔德县县长肖恩·康威是第三代的克罗拉多人。

A Welding Procedure Qualification Record ( Form No.: FN09/ 02-02) is a record of the welding data used to weld a test coupon.

焊接程序检定记录（表号：FN09/02-02）为焊接数据记录文件，用于附体试片的焊接操作。

Penetrant flaw detection agent was used to detect the backing weld surface, and the number of cracks was indicated by surface crack rate.

打底焊缝正面使用渗透探伤剂探伤，用表面裂纹率表示裂纹的数量。