welded的例句大全

Design of the Welded Bogie Frame on TGV High Speed Train in France

法国TGV高速列车焊接转向架构架的设计

Ways to Improve Outside Appearance of Welded Parts on Bulldozers

提高推土机焊接件外观质量的途径

The welded seam of the TWB jointed by LBW contained large quantity tiny equiaxial crystal and the heat-affected-zone ( HAZ) was not obvious, the columnar crystals and cellular dendrite near the bond line were grown in the orientation of radiation.

激光拼焊板焊缝中心为大量细小的等轴晶；热影响区不明显，在熔合线附近存在少量沿散热方向生长的柱状晶和胞状树枝晶。

The residual stress imposes considerable negative influence on quality of the spiral welded pipe.

残余应力对螺旋焊管质量有显著影响.

Aimed at resolving high non-linear problems and eliminating computational noise effects in numerical simulation of forming tailor welded blanks ( TWB), a solving method for the optimum parameters of forming process based on approximation optimization technique was developed.

为解决拼焊板（TWB）成形数值模拟中的强非线性问题并消除计算噪声效应，提出了一种基于近似优化技术的最佳成形过程参数求解方法。

Tailor welded blank ( TWB) and its forming technology is just a new technique to adapt to this development direction.

拼焊板及其成形技术正是适应这一发展方向的新技术。

Tailor-welded blank ( TWB) with different thickness ratio plays an important role in the lightweighting technology of automobile industry.

拼焊板成形技术，特别是差厚拼焊板成形技术，是汽车轻量化的一个重要发展方向。

Tailor-welded Blank ( TWB) is one of the most important technologies in automobile body manufacture in recent years, whose welding quality and residual stresses and deformation have great effects on the following stamping process and its performance properties.

拼焊板是近年来用于汽车车身制造的一种重要技术，其焊接质量的优劣及残余应力状态与变形的大小对后续的冲压成形工艺和产品的使用性能都有很大影响。

The applications of TWB ( tailor welded blanks) and TRB ( tailor rolling blanks) were focused for auto-lightweight and a few of researching keys of the TRB's applications in auto-body manufacturing were given.

重点介绍了激光拼焊板和柔性轧制技术，着重讨论了连续变截面辊轧板（TRB）在汽车轻量化中的应用，并给出了TRB在车身制造应用中尚需深入研究的重点。

Effect of inclusions and hydrogen on cold bending property of 15MnVN_q ( C 、 B) steel butt welded joint

夹杂物与氢对15MnVN q（C，B）钢对接接头冷弯性能的影响

A high-power high-frequency inductive power supply used in ERW for medium-sized straight welded pipes is introduced.

介绍了用于中口径直缝焊管线焊接的高频 大功率 焊接电源,其采用基于IGBT功率元件 的串联谐振式感应电源技术.

Dissipation factor is small because the leads are directly welded to electrodes.

引线直接点焊于电极,损耗小.

Development of φ 219mm medium-sized welded pipe forming mill

Φ219mm中径焊管成型机组的研制

Pressed and welded steel banjo housing, single reduction, hypoid.

冲压，焊接钢班卓琴住房，单减少，双曲线。

In this paper, a new model based on a track on the solid ballast for analyzing the longitudinal temperature stress distribution of welded continuous track is presented.

以整体道床上的新型轨道为基础，提出了一种用于计算此类轨道纵向温度力分布的新模型&轨道爬行。

Study on the Distribution of Longitudinal Temperature Stress along Welded Continuous Rail on the Solid Ballast

整体道床无缝轨道纵向温度力分布规律研究

Evaluation and Discussion of Root Flaw of Welded Joint with Backing Strip

射线底片上带垫板单面焊缝根部缺陷的识别探讨

Through calculation and analysis of the test results, the concordance of the failure mechanism on the different combined stress levels were verified and the reliability mathematical model for friction welded joints was set up.

通过对试验结果的统计和分析，证明了各组合应力水平失效机理的一致性，并且得到了摩擦焊接头可靠度的计算模型。

Briefed in the paper are the invention and development history of the ERW straight welded pipe forming mill.

简要介绍了ERW直缝焊管成型装置的产生和发展历程。

Failure analysis of 321 stainless steel welded corrugate pipe

321不锈钢焊接波纹管失效分析