welded的例句大全

Cause analysis of welded seam cracking for comb-shaped seal passing through the roof of reheater

再热器穿顶棚梳形密封焊口开裂原因分析

Optimization of Welding Parameters and Microstructure of Welded Joint of Al 2O 3P/ 6061Al Composite

Al2O（3p）/6061Al复合材料焊接工艺参数的优化及接头组织

Our company's main products are: crimped wire mesh, chain link mesh, window screening, Fiberglass mesh, welded wire mesh etc, high quality with lowest price, all of them are warmly welcomed by buyers.

我公司产品主要有轧花网、勾花网、窗纱、网络布（玻璃纤维网格布）、电焊网等产品，质优价廉深受国内外客商的欢迎。

The SnO_2/ glass and the wire have been Welded at high fixity. At the same time a metallic conducting belt has been made.

用复合工艺实现了玻基SnO2薄膜与导线的高强度焊接，并同时在薄膜上制得了金属导电带。

Dissipation factor is small because the leads are directly welded to electrodes.

引线直接点焊于电极,损耗小.

A high-power high-frequency inductive power supply used in ERW for medium-sized straight welded pipes is introduced.

介绍了用于中口径直缝焊管线焊接的高频 大功率 焊接电源,其采用基于IGBT功率元件 的串联谐振式感应电源技术.

Effect of inclusions and hydrogen on cold bending property of 15MnVN_q ( C 、 B) steel butt welded joint

夹杂物与氢对15MnVN q（C，B）钢对接接头冷弯性能的影响

The applications of TWB ( tailor welded blanks) and TRB ( tailor rolling blanks) were focused for auto-lightweight and a few of researching keys of the TRB's applications in auto-body manufacturing were given.

重点介绍了激光拼焊板和柔性轧制技术，着重讨论了连续变截面辊轧板（TRB）在汽车轻量化中的应用，并给出了TRB在车身制造应用中尚需深入研究的重点。

Tailor-welded Blank ( TWB) is one of the most important technologies in automobile body manufacture in recent years, whose welding quality and residual stresses and deformation have great effects on the following stamping process and its performance properties.

拼焊板是近年来用于汽车车身制造的一种重要技术，其焊接质量的优劣及残余应力状态与变形的大小对后续的冲压成形工艺和产品的使用性能都有很大影响。

Tailor-welded blank ( TWB) with different thickness ratio plays an important role in the lightweighting technology of automobile industry.

拼焊板成形技术，特别是差厚拼焊板成形技术，是汽车轻量化的一个重要发展方向。

Tailor welded blank ( TWB) and its forming technology is just a new technique to adapt to this development direction.

拼焊板及其成形技术正是适应这一发展方向的新技术。

Aimed at resolving high non-linear problems and eliminating computational noise effects in numerical simulation of forming tailor welded blanks ( TWB), a solving method for the optimum parameters of forming process based on approximation optimization technique was developed.

为解决拼焊板（TWB）成形数值模拟中的强非线性问题并消除计算噪声效应，提出了一种基于近似优化技术的最佳成形过程参数求解方法。

The residual stress imposes considerable negative influence on quality of the spiral welded pipe.

残余应力对螺旋焊管质量有显著影响.

The welded seam of the TWB jointed by LBW contained large quantity tiny equiaxial crystal and the heat-affected-zone ( HAZ) was not obvious, the columnar crystals and cellular dendrite near the bond line were grown in the orientation of radiation.

激光拼焊板焊缝中心为大量细小的等轴晶；热影响区不明显，在熔合线附近存在少量沿散热方向生长的柱状晶和胞状树枝晶。

Ways to Improve Outside Appearance of Welded Parts on Bulldozers

提高推土机焊接件外观质量的途径

Design of the Welded Bogie Frame on TGV High Speed Train in France

法国TGV高速列车焊接转向架构架的设计

The steel stranded wiring harness reeving device is mainly composed of a cylindrical part and a conical part which have the consistent bottom area and are both bended and welded by steel plates;

本实用新型钢绞线束穿索器，主要由底面面积一致的圆柱形部和圆锥形部组成，两者均为钢板折弯焊接而成；

A study of the fracture behaviour of b30/ qts clad plate welded joints

B30/QTS爆炸复合板焊接接头断裂行为的研究

Numerical Simulation on Temperature Field in Tantalum Tube and Ta/ 16 MnR Clad Sheet Welded Joint

钽换热器管板焊接接头温度场数值模拟

KMC production of fully welded ball valve diameter DN15-DN1500, the use of advanced design and manufacture of high quality standard ball.

KMC全焊接球阀的生产口径DN15-DN1500，利用先进的设计制造出高品质的标准化球阀。