wheels的例句大全

Depth control wheels-to ensure a uniform depth of the drip lines embedding.

深度控制轮 — 确保滴灌管掩埋深度一致.

Sixteen hours after takeoff, the Vimy's wheels touched ground.

起飞后十六个小时, “维米号”的双轮着陆了.

Cast aluminum wheels require coated balance weights and special alignment equipment.

铸铝车轮要求使用带涂层的平衡重物和专用的对准设备.

I think making the engine parts and wheels red were a mistake.

我觉得引擎和轮胎部分漆成红色是败笔,用硌或钢可能看起来更漂亮.

Fuselage Body, Wings , Landing Skid , Propeller, landing Wheels, Linkage Rod, Cabin.

机身 、 机翼、起落架 、 螺旋桨 、 机轮 、 连杆 、 机舱罩、机头罩.

This is because the driving front wheels are trying to go around the steering axis inclination pivot point with a negative scrub radius.

这是因为驾驶前轮正试图去左右督导轴倾角支点与负面的磨砂半径。

The tires allow for rubber to be re-injected once breakdown of the first set occurs, allowing for longer life and less ( maybe even NO) dumping of waste because of wheels.

轮胎橡胶允许被重新注入曾经是第一组发生故障，更长的寿命和更小（甚至无）因车轮倾倒废物允许。

It is required to support the engine, car Body, wheels, and other car components.

车架必须承载发动机 、 车身 、 车轮和其它汽车零部件.

He drove the car into a street light an damaged the wheels.

他开车撞上了街灯,把车轮撞坏了.

Flexible joints allow the rear axle and wheels to move up and down without affecting operation.

灵活的接头使得后轴和后轮能够上下运动而不影响操控.

They vainly attempted to turn back the wheels of history.

他们妄图使历史车轮倒转.

The stone was so heavy that the wheels cracked. Old Nick didn't even break a sweat.

石头如此沉以至于车轮都压裂了,但老尼克仍然没费一点儿劲.

The locomotive whistled , there was the click of steel wheels passing over switches.

火车呜呜地鸣着汽笛, 钢轮擦过铁轨的转辙器时,发出了卡嗒卡嗒的响声.

Such as: synthetic industrial diamond powder and cubic boron nitride ; grinding wheels and cutting discs, etc.

其畅销产品有: 人造工业金刚石,立方氮化硼、聚晶等超硬材料和磨轮、锯片等金刚石工具.

The actors dragged on a boat with wheels.

演员们把下面装有轮子的船拖上来。

The attitude control problem of a wheels-controlled spacecraft is discussed in this paper.

本文讨论飞轮控制航天器的姿态控制问题。

Outside the house, the soft rumble of wheels and the clip-clop of hooves echo through the still night.

在房子之外，软的隆隆声轮子和蹄夹子嗒嗒声整寂静的晚随声附和。

This paper describes the dressing principle and its grinding characteristics of vitrified bonded CBN wheels trued by cup truer.

研究杯状砂轮修整器对C BN砂轮的修形原理，及修形后砂轮磨削特殊钢的加工特性。

Position measurement system is a set of device that detecting absolute displacement for precise producing technology platform of digital agriculture. The device provides precise position to the platform produce, and provides data to assure two sides wheels of the platform moving synchronously.

位置测量系统是数字农业精准生产技术平台上用来检测平台行走绝对位移量的测量装置，为精准生产提供准确位置，并为保证平台两侧轮同步运行提供参考数据。

Changing the abraser wheels and change the test!

改变磨石轮和更改测试！