workpiece的例句大全

Resin bonded silicon carbide grinding block during the grinding process, high grinding efficiency, good self sharpening abrasive tool, workpiece surface is not easy to burn and polishing performance and good processing properties, it can be widely applied in the field of material surface processing.

树脂结合剂碳化硅磨块在磨削过程中磨削效率高、磨具自锐性好、被加工工件表面不容易烧伤和抛光性能好等加工特性，因此在材料表面加工领域得以广泛应用。

Research on Loading or Unloading Automatically Workpiece on Catenary Suspension Painting Line

基于悬链涂装线自动上、下工件的研究

Research in predicting and modeling microstructural changes a workpiece using FEM is in progress.

利用有限元分析的方法预测和还原工件的微观结构变化尚待进一步发展.

Study on Compacting Mechanism of Hollow Workpiece by 3-Roll Cross Wedge Bolling

三辊楔横轧空心件成形机理的研究

The measurement technology is based on a novel fine touch sensor which enables the cutting tool tip itself to be used as the contact probe to implement workpiece inspection.

该系统采用新型触发式传感器，可使刀具刀尖自身作为测头测试工件加工尺寸。

A novel mode of uncertain eccentricity plane lapping is presented, while the workpiece rotates about its own axis, it's revoluting about the axis that is perpendicular to the abrasive disk.

提出了一种新的不定偏心平面研磨方式，主动驱动工件使其在绕自身回转轴自转的同时，绕垂直于研磨盘表面的轴线公转。

The relative velocity function of the workpiece to the abrasive disk is obtained through kinematic analysis, the material removing function and the lapping uniformity function are deduced based on Preston equation.

在Preston方程基础上，建立了材料去除函数和研磨均匀性函数。

This paper start from the analysis of the stress in the centerless grinding process, deducing the stable grinding conditions of the workpiece in different circumstances, and then the stable grinding area chart are drawn.

论文首先分析了无心磨削过程中工件的受力情况，推导出工件在各种情况下的稳定磨削条件，并绘制了稳定磨削区域图。

The conductive body can keep elastic contact with the welding workpiece under action the elastic piece.

导电体在弹性件的作用下可与焊接工件保持弹性接触.

A mathematical model for the resource selection and allocation with the least production cost and workpiece delivery time satisfaction has been built, and the ant colony genetic algorithm ( ACGA) is introduced.

本文建立了以满足工件交货期为前提，在产品多工艺路径的制造方式下，制造费用最小，直接利润最大化的资源选择与分配问题的数学模型，引入蚁群遗传算法。

Applied range: hardware stamping parts, automobile, motorcycle spare parts, shell workpiece, and silicon steel sheet, etc.

应用范围: 五金冲压件, 汽车 、 摩托车零配件, 壳类工件 、 硅钢片等.

The workpiece was done successfully by mould design, manufacture and test.

通过模具设计 、 制造和调试,成功地实现了计时器盒盖的成型.

The traditional manufacture order such as cutting-harden-grinding may be changed by using this technology, and the weariness strength and productivity of workpiece is improved, and the consumed power is reduced.

这种工艺方法可改变传统切削淬硬磨削制造工序，能有效地提高生产率、降低能量消耗及提高加工零件的疲劳强度。

Based on experiment, the influence of the process parameters of fluid Jet polishing ( FJP), including working pressure, working distance, jet angle and working time etc, on the removal rate of the workpiece is investigated.

以实验为基础，研究了液体喷射抛光技术的各工艺参数，包括喷射角、工作压力、工作距离和作用时间等参量对工件材料去除的影响。

The surface shape of the workpiece is exactly modified by controlling the parameters of FJP, such as pressure, direction, working time etc.

通过控制液体喷射的压力、方向及驻留时间等量来定量修正被加工件面形的新型光学加工工艺。

The choice of manufacture process parameters directly affects the quality and size precision of the workpiece.

成型工艺参数的选择对成型件质量的性能及精度有直接的影响.

Application of HLN Hardness Tester in Testing Huge Workpiece

里氏硬度计在大型工件测试中的适用性

It advanced an automatic and speed-down technology, which guarantee the procession and stability of workpiece process.

具有“前瞻”功能的自动加减速控制技术, 保证加工表面的精度和平稳性.

Six is the master , film, and check the quality of the workpiece.

六是去掉转印膜, 并查抄工件质量.

It is essential to know the temperature distribution of the tool and workpiece duringmachine cutting process.

机加工过程中,为提高加工精度、延长刀具寿命,研究刀具与工件的温度分布极为重要.