介绍的例句大全

This paper mainly describes the automatic detection principle and control methods of cold rolled strip shape, and puts forward the main factors for detection and control of shape in the tandem mill in AISC Cold Rolled Sheet Plant, the optimum shape control process is therefore further cleared.

主要介绍了板形自动检测原理和控制手段，提出了鞍钢冷轧厂联合机组板形检测和控制要素，进一步明确了优化板形控制工艺。

Analyzed forming process of the reverse-gear shifting fork used in automobile, designed a progressive die, introduced die structure, hoped it has a certain reference to the similar parts die design.

分析了汽车零件倒档拨叉零件成形工艺，设计出了一幅级进模，并介绍了该模具结构，希望对类似零件的模具设计有一定的参考作用。

This paper introduces the features of the modern shore structure-the tied buttressed retaining wall without bottom between buttresses.

介绍了一种新型护岸结构&预应力锚杆无底扶壁挡土墙结构，该结构由立板、肋板和防滑齿墩及预应力锚杆体系组成，是一种适用于岩基的新型护岸结构。

Introducing the performance of spraying welding layer for nickel wearing resistance alloy.

介绍了镍基耐磨合金喷焊层的性能。

Dear Sirs, We have the pleasure of introducing ourselves to you as one of the most reputable rain wears exporters in Taiwan, who has been engaged in this line of business since 1985;

原文范例”翻译范例敬启者：我们有这个荣幸向您介绍，敝公司是台湾最具信赖度的雨具出口商之一，我们自从一九八五年即开始从事这个（雨具）行业；

In this paper, the production process of super worsted fabric with wool and water soluble PVA is summarized, such as top dyeing, spinning, weaving and finishing.

文中从原料选用，以及条染、纺纱、织造、染整等方面介绍了该产品的生产工艺。

The properties of four new silicone defoamers are assessed in jet dyeing machine, and their influence on the dyeing properties is also investigated.

简要介绍了消泡剂的现状及消泡原理，并测试了四种新型硅酮消泡剂在喷射染色机中的消泡性能，以及消泡剂对染色性能的影响。

In addition, the processing conditions and technologies of dope dyeing method for the colored meta-aramid fibers produced were introduced in detail.

同时介绍了原液着色方法制备间位芳香族聚酰胺有色纤维的工艺与条件。

Ground dyeing with KN type reactive dye and non-fixation on cotton fabric, and then printing with K type reactive dye are introduced.

介绍纯棉织物以KN型活性染料染底，但不固色，再以K型活性染料印花入色的活性防活性印花工艺。

And to research the semi-structure characteristics of XML: self-describe, graph-based model and irregular. Then the analysis of normal tree-structure model is presented. Lastly, we give labeled ordered tree objects.

在对数据模型的研究中，首先介绍了XML数据模型和半结构化的数据模型，研究了XML的半结构化特征：自描述、图结构和不规则，并分析了XML常见的树结构模型。

A ovel switchbox router, DDCR, is described in this paper. Based on the heuristic principle, it features a dynamic routing density and constraint graph to complete the ordering of nets as well as the selection of routing segment.

本文介绍一种新的四边通道布线器（DDCR），该布线器基于启发式原则提出，并应用动态布线密度和约束图完成线网定序和连线段选择。

The high purity cyclohexane oxide was cyclohexane oxide from 80% cyclohexane oxide by the reation with boron trifluoride ethyl ether, hydramine to produce high boiling point material.

介绍了用80%的环氧环己烷分别与三氟化硼乙醚、羟胺进行反应，将环氧环己烷中的戊醇、酮、醛生成高沸点产物，再进行精馏，从而获得高纯环氧环己烷的方法。

This paper presents a compact microcomputer system having the functions of self-diagn osis, self-restoring and the ability of protection for power cutoff.

本文介绍的专用微机系统结构紧凑，具有自诊断和自恢复功能，并有掉电保护措施。

An advanced intelligent system about automatic balance of on line emery cutter is introduced.

介绍了作者研制的一种新型智能化砂轮在线自动平衡系统。

The performance, characteristics and principal technical datum of GSS-800 consumable electrode water jet semiautomatic underwater cutting apparatus are also outlined.

扼要介绍了GSS-800型半自动熔化极水喷射水下电弧切割设备的性能，特点和主要技术参数。

This paper introduced the machining properties of PCD tool in cutting out Al2O3 laminated flooring, and made a study on the configuration of tools, the material 0f cutting edge, the engagement angle of the tools and the machining parameters.

本文介绍了切削Al2O3强化木地极的加工特点，研究了金刚石刀具的结构、切削刃材料、几何角度及切削参数等。

The solving method for main cutting edge and grinding principle for flank of non coaxial helical micro drill point is described.

介绍了主切削刃的求解方法以及非共轴螺旋面钻尖后刀面的刃磨原理；

An advanced electrolytic process using high molecular polymer film as the diaphram to prepare high purity auric potassium cyanide was presented as the subsequent purification process.

介绍了一种先进的高分子聚合物隔膜电解制备高纯氰化金钾工艺及纯化工艺。

A cybernetic model system scheme on interaction of arc and circuit is introduced and its functions in the field of studying the bum-ning and quenching processes of arc are discussed in this paper.

本文介绍了电弧和电路相互作用的“控制论”模型系统图，并论述了它在研究电弧燃烧和熄灭过程力面所起的作用。

Using SQL Server, this text realizes establishment of data warehouse, tobacco sales data query and analysis in the established data warehouse.

本文最后详细介绍了卷烟销售的E-R模型设计，并以Sql Server为工具，实现了数据仓库的创建、卷烟销售数据的查询分析。