介绍的例句大全

The basic principle and implementing method was mainly discussed of automatically generating 2D drawing based on parametrical feature modelling system ( LONICERA system). The emphasis is introducing the theorem of creating projection view and cross sectional view.

主要研究了基于参数化特征造型系统（金银花系统）中二维工程图中的视图布局及图形处理的基本原理及实现方法，重点介绍标准视图和剖视图的生成原理。

This paper describes JCO criticality accident situation including the background, process chronology and emergency countermeasures taken of the accident and its radiation consequence.

本文介绍了日本JCO公司核临界事故的背景、事故过程、所采取的应急措施等事故情况以及事故的辐射后果。

In this paper, the fabrication of intermediate joint, selection of crimping tool, construction procedure and difficult point in technique are introduced in detail.

本文详细介绍了中间接头的制作，压接工具的选择，以及其施工方法与技术难点。

The Article hereby introduces the design and construction method of rock crib that is used in slope protection instead of rubble masonry, and presents its application in solid engineering works.

文章介绍用石笼代替块石码砌作为边坡防护结构的设计和施工方法以及石笼在实体工程中的应用。

Introduced the role of the rock crib dyke, concrete design and construction method.

介绍了石笼堤坝的作用和具体的设计及施工方法。

This paper introduces the principle and method of the holding control for automatic charging and plunger chip, which is realized by using proximity switch to test the motion of crankshaft of punch press, and velay or SCR to control clutch through electromagnet.

本文介绍了利用接近开关检测冲床曲轴动作，利用继电器和可控硅通过电磁铁控制离合器吸合动作，从而实现冲床自动送料动作和冲头动作同步控制的原理及方法。

The technical feature of FSC from Honeywell Company and its application in the catalyst cracker plant in the Company are introduced. The structure and operation of the system are described and the effect is summarized.

介绍霍尼韦尔公司故障安全控制系统FSC的技术特点以及在我厂重油催化裂化装置的应用情况，说明了该装置故障安全控制系统组成和操作界面，并总结了应用效果。

This paper systematically introduced separation technology of cracked C5 residue abroad.

介绍了国外裂解碳五馏分的分离技术。

An account is given of the startup of the accessory sulfur-tolerant shift converter of the Shell gasifier with heavy oil cracked gas and its operation.

介绍了与Shell煤气化配套的耐硫变换装置采用重油裂化气开车及运行情况。

This article introduced the whole tap stopper made of particles from fused corundum, scaled graphite, fused zircon mullite and a little of additive and binder under 150 Mpa.

本文介绍了利用电熔刚玉、鳞片状石墨、电熔锆莫来石、少量添加剂与结合剂，分别造粒后于150Mpa压力下一次复合而成整体式塞棒。

According to the change of the corrective network after a missile remodeling, the author analyzed the reason of this change, introduced the compensation principle of the band-block network and gave the design method of these active networks.

根据某导弹改型前后校正网络传递函数的变化，分析了网络变化的原因，介绍了陷波器消除结构谐振的补偿原理，并给出了此类有源陷波器的设计方法。

Finally, the construction process of the corrosion preventive project is presented.

最后介绍了该措施的施工过程。

Several familiar forms of marine corrosion were generally introduced with its evaluation techniques.

概述金属材料常见的几种海洋腐蚀形态，并从技术层面介绍不同腐蚀形态的评价方法。

For moderate-hard teeth of gears, this paper describes the machining technology, machine tool and cutter, as well as design requirements for preventing early fatigue corrosive pitting.

介绍中硬齿面齿轮制造工艺，机床和刀具的选择及早期疲劳点蚀的预防对设计要求。

Introduced the test metal corrugated pipe, the diaphragm, the bellows, the reflect scope, the reflector, the caper diaphragm, the isoelastic part and characteristic parameter.

介绍了测试金属波纹管、膜片、膜盒、跳跃膜片等弹性元件特性参数的测试仪。

Introduces a detector for the corrugated steel bar, metal pipe and living wire in the wall.

介绍了一种墙体中钢筋，金属水管，电线探测器。

The paper introduces the operating principle of the blind drilled press, the press section arrangement of the 4400/ 420 corrugating medium paper machine, the design parameters of the blind drilled press roll and the operating practice of the blind drilled press.

叙述了盲孔压榨的工作原理。介绍了4400/420瓦楞原纸机的压榨部配置、盲孔压辊的设计参数、盲孔压榨的运行实践。

A method for the determination of substrate cortisone acetate and product prednisone acetate in the culture by HPLC was developed.

介绍了用HPLC对醋酸泼尼松发酵液中的底物醋酸可的松和产物醋酸泼尼松的含量进行测定的方法。

A summarization of basic theory of distribution systems reliability is presented. At the same time, systems reliability indices formulas are introduced.

综述了配电系统可靠性评估和可靠性经济学的基础理论，并介绍了可用于可靠性评估的各项指标。

The Second is using balance scored card to design the performance, appraisal system to ensure the behavior and the results of all employees meeting the business strategy.

首先是职务分析，其次介绍人力资源规划及其步骤，第三是运用平衡记分卡来设计绩效考核体系，确保所有员工的行为符合公司的经营战略。