介绍的例句大全

This paper introduces the application of the backfill grouting technique to block up the branch tunnel, the corresponding technology, technique request and result evaluation are given.

文章介绍了回填灌浆技术在支洞封堵中的应用，支洞回填灌浆的施工工艺、技术要求以及效果评价。

Two anti-static blankets are introduced in the text with discussions and analyses of two different knitting methods of electricity conductive fiber at blanket back cloth.

介绍了两种抗静电毛毯，并对导电纤维在毛毯底布的两种编织工艺进行分析探讨。

Advantages of using Gigabit Ethernet as network backbone are also introduced.

介绍了采用千兆以太网作为校区间网络主干的优势。

The artificial neuron model and backbone structure of neural network is introduced.

介绍了人工神经元模型与神经网络基本结构。

It is described that the sensitivity of impedance back up protection for transformer wind short circuit is very low.

介绍了后备阻抗保护对变压器绕组短路灵敏度很低。

The paper introduces the new processing and technique such as embedded back-up plate, wholly craning and installing the guide pulley, etc. which are used to install hoist, which can not only improve installing quality and simplify installing procedure, but also can raise the working efficiency.

介绍了提升机安装中采用预埋垫板、导向轮整体吊装等新工艺、新技术，不但提高了安装质量，简化了安装工序，而且还提高了施工效率。

The issue includes a profile of the attachment parenting guru, Dr. Bill Sears, who wrote one of the movement's bibles, "The Baby Book," 20 years ago.

这期杂志还介绍了“亲密育儿法”的大师比尔-西尔斯博士。他在20年前出版了论述这种育儿方式的权威著作《亲密育儿百科》。

The issue includes a profile of the attachment parenting guru, Dr. Bill Sears, who wrote one of the movement's bibles, The Baby Book, 20 years ago.

这期杂志还介绍了亲密育儿法的大师比尔-西尔斯博士。他在20年前出版了论述这种育儿方式的权威著作《亲密育儿百科》。

The recent investigation results in the field of computer simulation of returned sand cooling and its fundamental research have been introduced.

介绍了近年来国内外在旧砂冷却计算机数值模拟及其基础研究方面的研究成果。

Finally, a review is made on the genetic relationships between mineralization and magma evolution and the associated characteristic of ore systems.

文中还介绍了层状岩体中典型矿床的成矿作用与岩浆演化过程的成因联系。

This paper introduces the physical basis, instrument and equipment, methodology and technology which to find associated mineral for field X-ray fluorescence determination.

介绍了现场X射线荧光勘查技术的理论基础、仪器设备和运用X荧光分析仪寻找伴生矿的方法技术。

It analyzes cause of quality problems of facing stone and working principle of its maintenance, its construction method of maintenance of facing stone, which to delay quality problems of stone and improve effect and service life.

分析了饰面石材产生质量问题的原因以及石材养护的作用原理，介绍了石材养护的施工方法，以避免和延缓石材质量问题，提高装饰效果及使用寿命。

The design of bending forming mill of solar energy water-heater support, which is applicable to the village usage, was introduced.

介绍了适用于农村使用的太阳能热水器支架弯曲成形机的设计。

This paper introduces hydraulic-formed of large diameter bellows and the control of hydraulic-former, mould, water-tight seal, manufacturing process used in three gorges project.

本文结合近年来在工程上的应用实践，就大直径波纹管的液压成形制造，在液压成形机、模具、水密封及制造工艺控制等方面介绍了部分成果和应用实例情况（三峡右岸工程）。

This article makes a brief introduction to the design characteristics and construction method of the tower structure which is formed of the cable pylon and the fastening pylon, and also performs an analysis and exploration of the engineering cost of the same.

此文简要介绍了缆塔与扣塔合二为一的塔结构的设计特点、施工方法，并对工程造价进行了探讨和分析。

In this paper, the rectifying method of a deviated large calibre reinforced concrete pipe is explained and the instance of the deviation rectification of main pushing sewage pipe of Pudong, Shanghai by means of forcing out of the pipe and forcing in the pipe.

本文阐述了大口径钢筋混凝土管顶偏后的纠正方法，并着重介绍了上海市浦东排污水干管顶偏后通过管外加力法和管内加力法将其纠正的实例。

This paper introduces the process condition and controlling requirement of automatic control system of LF fining furnace of 50t electric furnace in Laiwu Iron and Steel General Works and it also do a expounding to PLC system arrangement, design plan, controlling function and controlling method.

简单介绍了莱钢特殊钢厂50tLF钢包精炼炉自控系统的工艺情况和控制要求，对其PLC系统配置、设计方案、控制功能及控制方法作了说明。

This paper recommends using GRC as facing material and mineral wool as thermal conservation material in manufacturing curtain wall form GRC exterior wall thermal conservation plank system.

本文介绍了采用GRC作面层材料，岩棉作保温材料，研制出幕墙式GRC外墙外保温板节能体系。

A new type of pipe clamp for facing machine is introduced. It is analyses that the characteristic and property, working principle, property index, location precision and so on for the pipe clamp.

介绍了一种新型钢管管端平头机的夹管机构，对夹管结构的特点和性能、工作原理、性能指标、定位精度等作了描述和分析。

According to Fu Jian Gymnasium project, this paper introduced technology of plant nail to stick facing stone.

本文结合福建省体育馆工程实际，介绍了饰面石板植钉锚固点贴施工技术。