仿真的例句大全

It is not economical and maybe brings about negative control effects to make control strategies by deterministic simulation with typical conditions and faults according to conservative principles.

按典型的工况和故障的确定性仿真及保守原则制定控制策略，其决策不但不经济，还有可能带来危险的负效应。

The paper establishes the deterministic simulation model using the theory of sine summation. The model parameters are determined using the Method of Equal Distances and the Method of Equal Areas.

用正弦和理论建立了信道的确定性仿真模型，并用等面积算法和等距离算法确定了模型的参数。

Deterministic computer simulation is widely used in science and technology.

确定性计算仿真在科学研究和工程技术中的应用非常广泛。

Mathematical model and simulation of the evaporating surface in a once-through boiler

直流锅炉蒸发区域的数学模型及其仿真

In this paper, the temperature, velocity and concentration fields in the pulverized coal boiler with rated evaporative power 130t/ h were coupled simulated in the case of different excess air coefficient.

本文对额定蒸发量为130t/h的煤粉锅炉在不同过剩空气系数下炉膛内的温度场、速度场、浓度场进行了耦合仿真。

Performance Simulation and Optimization Analysis of Falling-Film Evaporator with Horizontal Tube Bundle Analysis of Corrosion Failure of Tube in Surface Evaporative Air Cooler and Protection

水平管式降膜蒸发器性能仿真及优化分析表面蒸发式空气冷却器管束腐蚀及防护

Meanwhile, the simulation calculation results are analyzed to find out the pressure difference between flash evaporator and condenser under which indicates the power of the constant operation of the desalination system. 2.

同时，利用仿真模型，重点分析计算了不同参数下闪蒸器与冷凝器之间的压差，分析系统持续运作的理论动力。

The mathematical model for the motion of CVE 2 type chaotic vibration exciter was set up and its numerical simulation and chaotic identification were carried out.

建立了使用滑动轴承的CVE-2型混沌激振器所产生的运动的数学模型，并对其进行了数值仿真和混沌识别。

With the simulation calculation of dynamic model, it indicates the extra eccentric mass of wheel is the main reason for shimmy.

通过对动力学模型的仿真计算，发现车轮过大的偏心质量是导致摆振的主要原因。

Computer Simulation of Extravehicular Activity Based on Torque Ratio Optimization

基于力矩比优化的航天员舱外活动仿真

In numerical simulation experiments the exponential damping or oscillating damping functions were used to simulate discharge signals and the effect of extracting signal as well as some other influential factors was investigated.

数值仿真研究中，用指数衰减或衰减振荡波来模拟放电信号，研究了小波变换提取信号的效果及有关影响因素。

Based on UG's PET blowing machine mold opening and closing of system dynamics simulation study

基于UG的PET吹瓶机开合模系统动力学仿真研究

After making a summary of structure and design of the NoC routers, a new router structure based on BEWS for network-on-chip is designed. And detailed design, functional simulation, and performance evaluation are done to the new router structure.

总结片上网络路由器的基本结构和设计，设计了一种基于缓冲式虫孔交换技术的通用片上网络路由器结构，并对该路由器结构进行了详细设计、功能仿真和性能评估。

Simulation Research on start/ generation of Brushless Electro-magnetic Synchronous Machine ( BESM); Electromagnetic Design of an Inner Reaction Type HTS Reluctance Motor

电磁式无刷交流同步电机起动发电过程的仿真与实现内反应式超导磁阻电动机的电磁设计

By electromagnetic field finite element simulation, the influence of cogging structure and pole width on the BEMF waveform was pointed out.

通过电磁场有限元仿真，指出电机齿槽结构和磁极宽度对反电势波形的影响。

An Analytical Physical Model and Its Simulation for BCCD

BCCD器件解析物理模型与仿真研究

Besides, we analyzed HL7 and mainstream ECG standards, selected and optimized HL7 message and HL7 aECG standards to define the reference implementation of integration profile and implement simulation finally.

此外，详细分析了HL7和主流的ECG格式，选择和优化HL7消息及HL7aECG标准定义了集成模型的参考实现并对其进行仿真。

Advanced Continuous Simulation Language ( ACSL)& Application

连续系统仿真语言ACSL及其应用

The inductance of the load-winding of an actively compensated pulsed alternator ( ACPA) is of great importance to machine operation and design.

主动补偿脉冲发电机（ACPA）负载绕组电感系数是设计和仿真计算的一个重要参数。

By the help of computer aided design and ADS software simulation, it presents that when power amplifier outputs 35W, ACLR has reached-55 dBcs.

通过计算机辅助设计和ADS仿真分析，功率放大器在输出35瓦（45.4dBm）的情况下，ACLR达到-55dBc。