动机的例句大全

In order to localize the 12.9-grade bolts, with the engine con rod bolts as the objective, the material and process of the 12.9-grade con rod bolts are studied.

为实现12.9级螺栓的国产化，以发动机连杆螺栓为对象，研究了12.9连杆螺栓的材料和工艺。

One business consultant in New York describes his compulsion to maintain an aura of perfection.

纽约的一位企业顾问这样阐述他自己想要保持完美光环的动机。

The contamination and hazard of lubricating oil in engine running-in time was analyzed.

分析了发动机生产线磨合油的污染及危害；

The Motivation section provides an industry standard context ( references to OMG work) for our definition of terms.

“动机”一节为我们的词汇定义提供一个行业标准上下文（参考OMG的成果）。

Research on Pneumatic Manipulator Controller Based on PC/ 104

基于PC/104总线的嵌入式气动机械手控制器研究

Three Dimensional Internal Gravity Waves and Initiation of Convective Cloud Streets

三维重力内波和对流云街的启动机制

The Trigger Mechanism of "7.10" Local Convective Intense Rainfall And the Role of Urban Boundary Layer

7.10局地暴雨的启动机制及城市边界层的作用

The Application of Double Convex Combustion Chamber to 4-stroke Engine

双凸型燃烧室在四冲程发动机上的应用

Experimental Investigation on the Water Coolant Flow Field of Engine Cylinder Head

发动机缸头冷却水流场试验研究

Right Using Coolant Fluid of Engine

发动机冷却液的正确使用

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁（δ＝0.2mm）零件，材质为Inconel625高温合金。

The internal coolant channel in an actual turbine blade was simplified into a variable cross-section channel with ribs and bleeding holes.

以航空发动机涡轮叶片中段内部冷却通道为研究对象，将其简化为带肋变截面U型通道。

Disigning coolant channel on the firebox of liquid rocket engine to loxodrome ( equal-angle helix) groove can improve firebox coolant capability greatly.

将液体火箭发动机燃烧室的冷却通道设计为斜航线（等倾角螺旋线）槽形，可以大幅度改善燃烧室的冷却性能。

SZ-A Engine Revolution Counter for Motorcycle

一种用于摩托车发动机转速测量的仪表&SZ-A型转速表

Optimization of feed system and design of injection mould for automotive engine cover

汽车发动机罩盖浇注系统优化与注射模设计

Analysis of the Technological Process for the Engine Cover and Design of the Drawing Die

发动机罩工艺分析及拉伸模设计

Dense smoke coming out of No.4 engine cowling ( engine nacelle), fire suspected.

第四号发动机整流罩冒浓烟，可能着火。

Please open the engine cowling and check for leakage/ overheat/ wires// electrical connectors.

请打开发动机包皮检查渗漏/过热/导线/插头。

A further piece of debris, suspected to be an engine cowling, has been found in South Africa, and Malaysian authorities are working to arrange examination of the object.

还有一块疑似发动机罩的残骸已在南非被发现，马来西亚有关部门正安排对其进行检查。

In order to ensure solid motor with cracked grain to be successfully launched, the strain and stress concentration at the tips of crack should be released by shoveling slot on the crack of grain surface.

工程实际中通常采用于药柱表面裂纹处铲槽的方法来释放裂纹尖端的应力应变集中，以确保药柱含裂纹的固体发动机能正常点火发射。