压力的例句大全

They are less avoidant, have lower stress levels, and higher self-efficacy than passive procrastinators.

他们比消极拖沓者更少回避事情，有相对较小的压力以及更高的自我效能。

The wear ring is set for minimum clearance from gate for full rated back pressure.

磨损环用来最大限度缩小与闸板的间隙,以承受完全的额定压力.

The contemplated austerity measures will only put greater strain on fragile economic and social imbalances.

计划中的紧缩措施只会使脆弱的经济和社会失衡承受更大压力。

The structure and working mechanism on the new type of spring-piston pressure auto-balancing device with condenser was introduced.

介绍了作者自行设计的带冷凝器新型弹簧活塞式压力自平衡装置结构及其工作原理。

Relationship between behavioral problems and parenting stress of children with attention deficit hyperactivity disorder

注意缺陷多云障碍儿童行为问题与父母亲职压力的关系

As the pressure grows, we may see him backing off in some areas.

随着压力的加大, 我们可能看到他会撤出某些领域.

Long surface crack of pressure vessel is idealized as a single edge crack of long atrip in this Paper.

本文把压力容器长表面裂纹简化为狭长条的单边裂纹。

Theory of Pressure Swirl Atomisation and Study on the Characteristic of Droplet Size in Atomisation

压力旋流喷雾理论与喷雾粒度特性的探讨

English chemist and physicist who formulated atomic theory and the law of partial pressures ( 1766-1844).

（1766-1844）阐明了原子学说和局部压力定律的英国化学家、物理学家。

With the method of numerical simulation, the paper simulates the luohe bridge at the Longest Cantilever Construction Stage in the FLUENT procedure in order to compare the factor of wind load with experiment result.

以数值模拟为研究方法，在FLUENT程序中模拟了洛河大桥施工阶段最大双悬臂状态，将得出的压力系数与试验结果进行了比较；

Reading may seem like a mental strain at first thought.

乍一看来，阅读似乎是一种精神压力。

External components for the oil pump pressure lubrication oil lubrication system of forced circulation type.

外部零件润滑为油泵压力供油强制循环式润滑系统.

Metal forming press is one of the most commonly used manufacturing machines.

金属成型压力机是应用最为广泛的一种加工机床.

Viscous pressure forming ( VPF ) , a recently developed process, is an advanced approach in sheet metal forming.

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺.

The ore-forming pressure was small , ranging from 5 to 30 MPa.

热液压力不大,变化在5—30MPa之间.

The control object is the optimum forming temperature and it is realized by controlling forming pressure.

优化目标为最佳成形温度,而温度的控制主要通过压力控制来实现.

The relationships between thermo physical properties and porosity, forming pressure and space-holder addition were investigated.

总结得到了热物性参数与孔隙率以及制备这些毛细芯所使用的成型压力和造孔剂添加量之间的关系.

A common denominator of many low-stress jobs is tangible results.

许多低压力的工作都有个共同点那就是其效果切实可见.

Watching TV may be low-stress and moderately enjoyable.

看电视可能没什么压力,人也会觉得比较自在.

Her doctor tells her a low stress level will keep Behcet's in check.

医生告诉她,减轻压力有助于控制白塞症.