压力的例句大全

The authorities used quiet persuasion instead of the big stick.

当权者平心静气地劝说，而不是施加压力。

This hose is colorful, light in weight and flexible with low price.

质轻柔软,颜色鲜艳, 价格低廉适用于低压力的花园浇水和家居供水.

The tumor often spread to the adjacent structures in descending sequence: carina, tracheo-bronchus, descending aorta, azygos vein, pericardium, aortic arch. Effects of pneumoperitoneum on tracheal carina position under a variety of peritoneum pressure

肿瘤外侵最常累及的部位依次为隆突下、气管、降主动脉、奇静脉、心包和主动脉弓。气腹压力对气管隆凸位置影响的观察

We study the racial deformation and the axial deformation created by the certain gas pressure.

在一定气体压力作用下，研究弯曲关节的径向变形和轴向变形。

They are less avoidant, have lower stress levels, and higher self-efficacy than passive procrastinators.

他们比消极拖沓者更少回避事情，有相对较小的压力以及更高的自我效能。

The wear ring is set for minimum clearance from gate for full rated back pressure.

磨损环用来最大限度缩小与闸板的间隙,以承受完全的额定压力.

The contemplated austerity measures will only put greater strain on fragile economic and social imbalances.

计划中的紧缩措施只会使脆弱的经济和社会失衡承受更大压力。

The structure and working mechanism on the new type of spring-piston pressure auto-balancing device with condenser was introduced.

介绍了作者自行设计的带冷凝器新型弹簧活塞式压力自平衡装置结构及其工作原理。

Relationship between behavioral problems and parenting stress of children with attention deficit hyperactivity disorder

注意缺陷多云障碍儿童行为问题与父母亲职压力的关系

As the pressure grows, we may see him backing off in some areas.

随着压力的加大, 我们可能看到他会撤出某些领域.

Long surface crack of pressure vessel is idealized as a single edge crack of long atrip in this Paper.

本文把压力容器长表面裂纹简化为狭长条的单边裂纹。

Theory of Pressure Swirl Atomisation and Study on the Characteristic of Droplet Size in Atomisation

压力旋流喷雾理论与喷雾粒度特性的探讨

English chemist and physicist who formulated atomic theory and the law of partial pressures ( 1766-1844).

（1766-1844）阐明了原子学说和局部压力定律的英国化学家、物理学家。

With the method of numerical simulation, the paper simulates the luohe bridge at the Longest Cantilever Construction Stage in the FLUENT procedure in order to compare the factor of wind load with experiment result.

以数值模拟为研究方法，在FLUENT程序中模拟了洛河大桥施工阶段最大双悬臂状态，将得出的压力系数与试验结果进行了比较；

Reading may seem like a mental strain at first thought.

乍一看来，阅读似乎是一种精神压力。

External components for the oil pump pressure lubrication oil lubrication system of forced circulation type.

外部零件润滑为油泵压力供油强制循环式润滑系统.

Metal forming press is one of the most commonly used manufacturing machines.

金属成型压力机是应用最为广泛的一种加工机床.

Viscous pressure forming ( VPF ) , a recently developed process, is an advanced approach in sheet metal forming.

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺.

The ore-forming pressure was small , ranging from 5 to 30 MPa.

热液压力不大,变化在5—30MPa之间.

The control object is the optimum forming temperature and it is realized by controlling forming pressure.

优化目标为最佳成形温度,而温度的控制主要通过压力控制来实现.