合金的例句大全

The item of lot 2247 is made of Alloy metal.

第2247号拍品材质应为合金镀银.

A new process of barrel Ni-Fe alloy plating was developed.

研制出一种滚镀镍铁合金新工艺.

The strengthening of Co 40 NiCrMo was obtained from cold deformation and aging.

Co40NiCrMo高弹性合金的强化是通过冷变形强化和时效强化而获得的.

The strength of the moderator cell of cold neutron source analyzed under internal and external pressure.

冷中子孔道方管采用铝合金材料焊接而成,其作用是从冷中子源引出中子.

Coating of sodium silicate alumina clay for aluminium alloy casting in green sand mold is studied.

试验研究了应用于湿砂型铝合金铸件的以水玻璃为基、铝钒土为耐火填料的徐料.

The characteristics of melting and casting process of 1 A 20 aluminium alloy were summarized.

总结了1A20铝合金熔铸方面的一些特点.

Soldering of copper, copper alloys and galvanized iron plain sheet.

铜及铜合金、镀锌铁皮的钎焊.

The alloy was added to the mixture to make it worth less on the market.

通过降低成色而使合金的市场价值降低.

The two rubber barrels of it use independent sealing to prevent slip from rusting and fouling.

接纳双胶筒独立弥缝,有用防止卡瓦,生锈、结垢.卡瓦选用合金质料加工.

Q series of bevellers are hydraulic pressure drove, equipped with hard alloy cutter.

系列倒棱机床,采用液压自定心夹紧,液压可转位挡料器挡料,硬质合金刀切削.

The torch body shall be made from nickel chrome plated heavy guage brass.

手电筒主体需镍铬合金电镀,且需带有明显的铜质进度指示(线规).

The newest working style to combine the alloy metal and carbon.

业界首创超薄铝合金加碳纤维之折叠车.

Ferrous alloy is one of important and indispensable raw materials of steelmaking.

铁合金是炼钢的重要和不可缺少的原材料之一.

By using the same adjusting parameters, the energy band of Si-Ge alloy is computed, which is superior to the OPW result. Thus it can be seen that the zone-variational method is an effective and prospective computational method in band theory and has considerable wide application.

运用同样的调整参数来计算锗硅合金的能带，获得了比OPW法更好的结果，从而说明这是一种有效的能带计算方法，可望在其它领域中获得更多的应用。

Synergistic toughening modification of PBT/ PC blends with PTW and POE

POE和PTW协同增韧PBT/PC合金

In recent years, with the development of modern manufacturing, materials and processes are required for the continuous improvement. Quick plastic forming ( QPF) technology of magnesium alloy have become a hot spot in manufacturing.

随着现代制造业对材料和工艺要求的不断提高，近年来镁合金的快速气压胀形工艺已成为加工界的热点。

By using plasma arc method an Sn-P bronze hardfacing formed on steel 25, which contains more strengthening phases. The wearing property of the friction pair consisted of Sn-P bronze and Cr-plated wheel is better than that of bronze QAl 9-4 and Cr-plated wheel.

25钢基体锡磷青铜合金粉末等离子孤喷焊层，含有较多的强化相，与镀铬轮组成摩擦副，耐磨损性能明显优于由QA19-4青铜和镀铬轮组成的摩擦副。

A layer of ceramic film can be grown on Ti alloy by the micro plasma oxidation.

在钛合金表面用微等离子体氧化能产生一层陶瓷膜.

A layer of ceramic film is produced by micro plasma oxidation on the surface of Ti alloy in order to improve its corrosion resistant property.

为提高钛合金的耐腐蚀性能，在其表面用微等离子体氧化法生长一层陶瓷膜。

A smooth and compact gray-white ceramic film with good corrosion resistance is obtained under the optimal conditions.

在最佳工艺条件下，镁合金表面形成了一层致密光滑的灰白色类陶瓷膜层，该膜层具有良好的耐蚀性能。