合金的例句大全

Research on Viscous Pressure Forming ( VPF) of Aluminum Alloy Ladder Parts

铝合金阶梯形件粘性介质压力成形的研究

The same result was achieved when some TaC was added into WCo alloy.

当在钨钴合金中加入TaC时，同样得到了这种棱角圆滑的组织结构。

In early aging stage, the strength and hardness increased with increment of wMg/ wSi and wMg/ wCu values for Si-excess alloys.

结果表明：在时效初期，对于硅过剩合金，其硬度和强度随wMg/wSi和wMg/wCu值增大而提高；

The results of analysis show that wty the silicon separatas out as a preliminary phase, and why the Al-Si alloys have their own pseudoeutectic structures are all for thermodynamical reasons.

分析结果表明，共晶结晶时硅之所以成为先析出相，铝硅合金之所以存在伪共晶，都有其热力学原因。

The thesis have systematically investigated the structural and transport properties of as-quenched and annealed Co xCu 100-x ( 5 ≤ X ≤ 30) granular alloys prepared by melt spinning.

系统研究了用快淬制备的铸态和退火处理后的颗粒合金膜CoxCu100-x（5≤X≤30）的结构及磁电阻性能。

Microstructures of AZ80+ xSr Alloy and Existing forms of Sr

AZ80+xSr合金的组织和Sr的存在状态

Being etched with acid apueous solution, this alloy can be activated and hydrogenized easily, and yts kinetics is improved.

酸性水溶液浸蚀时该合金易活化和氢化，且改善了它的动力学特性。

The results show that the addition of Y and Zn improves YTS values but decreases the UTS and elongation values of as-cast alloys.

结果表明：Y、Zn元素提高了合金的屈服强度但降低了抗拉强度和延伸率。

E pure carbon as the standard sample and helped by the ZAF correction method, it is also applicable to the carbon content analysis of the carbide phases in high alloy steel.

用纯碳作标样，再以ZAF法修正计算，可用于高合金钢的碳化物相的碳量分析。

Study on Low Temperature Gas Multielement Co-penetration on Alloy Carburizing Steel Surface

合金渗碳钢表面低温气体多元共渗研究

Therefor chromium carbide is an ideal die material for producing electric vacuum glass product.

因此，碳化铬硬质合金是制作电真空玻璃制品的理想模具材料。

Influence of titanium carbide content in carbide tools on tool wear

硬质合金刀具材料中碳化钛含量对其耐磨性的影响

Study on Microstructure of High Manganese Steel Bonded Titanium Carbide

TiC-高锰钢结硬质合金显微组织分析

Influences of High Energy Ball Milling on Pore Ratio of Steel Bonded Titanium Carbide

高能球磨对TiC钢结硬质合金孔隙度影响的研究

Effect of Copper-zinc Alloy on the Crystal Structure of Calcium Carbonate Scale

铜锌合金对碳酸钙水垢晶体结构的影响

On the other hand, Co binder gradient formed by liquid state carburizing is due to migration of W atoms driven by diffusion of carbon atoms, leading to coarser and closer WC grains in the surface and inward diffusion of Co atoms.

液相渗碳处理时钴相梯度结构形成主要是碳原子扩散驱动下的W原子迁移，导致表层碳化钨晶粒长大并相互靠近，从而使液态钴向合金内部迁移。

The influence of Wall Thickness on the Mechanical Properties of Aluminium Castings

铝合金铸件壁厚对机械性能的影响

Cavitation corrosion resistance of cast high strength titanium alloy

高强度铸造钛合金的耐空蚀性能

High Strength Aluminium Castings for Military Usage

军用铝合金优质铸件整体铸造技术

Experimental study of CNC electrochemical grinding carbide alloy

数控电解磨削加工硬质合金的试验研究