合金的例句大全

Vacuum evaporated film of Ti-Cr alloy has been studied.

利用物理气相沉积（PVD）真空蒸镀法，研究铬钛合金装饰膜。

A study on vacuum evaporated decorative film of Ti-Cr alloy

蒸镀铬钛合金装饰膜的研究

This essay get breakthrough in the study of lining, new type high-temperature wearable alloy and parts and the soft start shaft coupling of centrifugal air exhauster changing in the tail of kiln.

本文在对内衬的技术研究开发、新型高温抗磨合金及其高温抗磨件开发研制、窑尾排风机软启动联轴器的设计发明与应用等方面取得了重大突破。

Technical features of 33 MW flue gas expander and the selection of high temperature alloy material

33MW烟气轮机的技术特点及高温合金材料选用

Study of vacuum die casting process of aluminum alloy automotive steering gear housing

铝合金汽车转向器壳体真空压铸工艺研究

The Research of Powder Release Agent for Aluminum Alloy Vacuum Die casting

铝合金真空压铸用粉状脱模剂的研究

CAE of Vacuum Die Casting Technology for Magnesium Shell Parts

镁合金壳体真空压铸工艺CAE

Compound Die Casting Technique for Vacuum Pump Body

真空泵泵体外壳复合金属型铸造工艺

The microstructure and tensile/ impact properties of a new type metastable beta titanium alloy ( insert composition here, Ti-B20) under different heat treatment conditions were studied.

研究了1种新型的亚稳定钛合金（Ti-B20）在不同热处理制度下的显微组织与拉伸和冲击性能。

The design of bi-hard alloy products of one pair of awls from that is moulded

带倒锥硬质合金制品自压模的设计

Directional Solidification of Zn 2.75% Cu Alloy and the Effect of ACRT Forced Convection

Zn-2.75%Cu合金定向凝固组织及对流的影响

Because of its large tensile strength, light weight, corrosion resistance, good sagging performance, all aluminum-alloy conductor ( AAAC) are widely used in many countries.

铝合金导线（AAAC）具有抗拉强度大、重量轻、耐腐蚀、弧垂性能好等优点，在很多国家被广泛采用。

Surface rolling strengthening of Mg alloy ZML

ZMl Mg合金的表面滚压强化

The paper present a series of ZFW heavy alloys applied in producing larger diameter inertia workpieces ( J220mm) in nuclear irradiation.

阐述了在核辐照条件下用ZFW系列高密度合金做较大直径（大于220mm）的惯性工件。

E pure carbon as the standard sample and helped by the ZAF correction method, it is also applicable to the carbon content analysis of the carbide phases in high alloy steel.

用纯碳作标样，再以ZAF法修正计算，可用于高合金钢的碳化物相的碳量分析。

The results show that the addition of Y and Zn improves YTS values but decreases the UTS and elongation values of as-cast alloys.

结果表明：Y、Zn元素提高了合金的屈服强度但降低了抗拉强度和延伸率。

Being etched with acid apueous solution, this alloy can be activated and hydrogenized easily, and yts kinetics is improved.

酸性水溶液浸蚀时该合金易活化和氢化，且改善了它的动力学特性。

Microstructures of AZ80+ xSr Alloy and Existing forms of Sr

AZ80+xSr合金的组织和Sr的存在状态

The thesis have systematically investigated the structural and transport properties of as-quenched and annealed Co xCu 100-x ( 5 ≤ X ≤ 30) granular alloys prepared by melt spinning.

系统研究了用快淬制备的铸态和退火处理后的颗粒合金膜CoxCu100-x（5≤X≤30）的结构及磁电阻性能。

The results of analysis show that wty the silicon separatas out as a preliminary phase, and why the Al-Si alloys have their own pseudoeutectic structures are all for thermodynamical reasons.

分析结果表明，共晶结晶时硅之所以成为先析出相，铝硅合金之所以存在伪共晶，都有其热力学原因。