喷的例句大全

Theoretical Approach to the Rejector Design

设计喷射器的理论探讨

Pump jet propulsor ( PJP), which was developed in the past several years, is a new propulsor with high propulsion efficiency, high critical velocity and low radiated noise.

泵喷推进器是近年来发展起来的一种推进器，具有推进效率高，辐射噪声低，临界航速高的优点。

The application of PLF-ⅰ motor spray valve in 30 m~ 3 polymerizer

PLF-Ⅰ型电动喷淋阀在30m~3聚合釜中的应用

Prospect of plastic media blasting ( pmb) process in aviation industry of China

浅谈塑料介质喷射除漆技术在我国航空工业的应用前景

The effects of ethanol blended gasoline fuel on emission characteristics have been investigated in a multi-point EFI gasoline engine.

研究了不同掺混比的乙醇-汽油燃料在多点电喷汽油机上应用时的排放性能。

The study of treatment for spray paint using benzol blends in railway system

铁路喷漆作业混苯治理措施的研究

He uses an all-purpose compressor he bought at Home Depot and fitted with an inflating needle ( the kind used to inflate a basketball or a bike tire) to precisely direct the air flow.

他所使用的是一个从家得宝（HOME DEPOT）买来的通用压缩机，再装上一个气针（就是用来给篮球或者自行车轮胎打气的那种）来精确地控制空气的喷射。

Numerical Simulation of Round Billet Profile Growth in Spray Forming Process

喷射成形过程中圆锭坯外形生长的数值模拟

Experimental results indicate that the optimized binder content and ingoing temperature of airflow are 50 ml/ kg and 240 ℃, respectively.

SiC粉体在喷雾造粒时最佳粘合剂含量和进口热风温度分别为50ml/kg和240℃。

It is effective to control the overwinter larvae by binding grass ring and smearing poison lime, and spraying B.T turbid liquid.

越冬幼虫的防治以绑草环诱杀和涂毒灰熏杀及喷白僵菌悬液防治较为有效。

On the basis of erosion wear theory of materials and the abrasive water jet cutting process, the mechanisms of both casing cutting and formation rock cutting with hydraulic sand blasting perforation of oil wells are discussed, and the influencing parameters are investigated.

根据材料冲蚀磨损理论和磨料射流切割原理，对利用水力喷砂射孔技术切割套管和近井地层岩石的机理及其影响因素进行了分析。

Construction method of wet blasting steel fiber concrete

湿喷钢纤维混凝土施工方法

Application of Construction Technique of Wet Concrete Blasting in Yanling Tunnel of Xikang Railway

西康铁路堰岭隧道湿喷混凝土施工技术

Carry out international grit blasting, bottom plate repairing and repainting work for aboveground oil tank no. 8 in Chevron Tsing Yi Terminal in 2006.

2006年于雪佛龙青衣油库进行8号油缸缸内打沙、修补缸式底及喷油工作。

The equipments of plasma arc spraying can not work normally when use a flux of work gas less than 20L/ min. The plasma arc blaze will be cooled down and the deposit speed will reduce when use a excessive flux of work gas.

等离子弧热喷涂的工作气体流量不宜过低，当低于20L／min实验所用的等离子设备将无法正常工作，相反气体流量太大将会冷却等离子弧焰流，导致沉积率显著降低。

Theoretical Prediction of Droplet Size Distribution for Biodiesel/ Diesel Blended Fuel

生物柴油&柴油混合燃料喷雾液滴尺寸数目分布的理论预测

Fusion bonded epoxy coating as a member of high performance coating family has been widely used for corrosion protection of steel pipeline and pipe pile.

熔融结合环氧粉末涂层的综合防护性能优良，已经大量应用于钢质管道和钢管桩，也很适合于钢筋的保护。钢筋表面涂装环氧涂层可用静电喷涂方法，工艺基本成熟。

Abstract: A paint vapour treatment by means of blowing and drawing ventilation in an airtight workroom is suggested in the article. Optimal ventilating parameters of push-pull flow dust control in large spaces

文摘：提出在密闭喷漆作业间，采用吹吸式通风法对作业间的漆雾进行治理的方案。吹吸气流控制大空间粉尘最佳通风参数的研究

Study on film boiling heat transfer of water jet impinging on hot plate

高温平板上喷流冷却膜沸腾区域的换热特性研究

A paint vapour treatment by means of blowing and drawing ventilation in an airtight workroom is suggested in the article.

提出在密闭喷漆作业间，采用吹吸式通风法对作业间的漆雾进行治理的方案。