塑料的例句大全

The Application Study of Glass Fiber Reinforced Plastic Mortar Pipe Culvert

玻璃纤维增强塑料夹砂管涵洞的应用研究

Present situation and development trend of domestic and foreign high resilience cold curing PU foams plastics

国内外高回弹冷固化聚氨酯泡沫塑料发展现状与动态

[ Results] Then success rate of calculus removed was 100% by application of fiber choledochoscope, in which one case with benign closeness at lower segment of choledoch, plastic supporting tube was placed successfully at one operation by fiber choledochoscope.

结果应用纤维胆道镜取石成功率100%，1例胆总管下段良性狭窄，经纤维胆道镜下，置放塑料支撑管一次性成功。

The influence of many factors, such as the content of filled magnetic particles, forming conditions and pulse electric discharge magnetization on the magnetic and mechanical properties of the magnetic strips has also been studied.

探讨了磁粉填充量、成型工艺条件、脉冲放电充磁等因素对磁性塑料条磁性能、力学性能的影响。

The turbine-generators are equipped with Babbitt metal thrust bearing shoes and may be with elastic metal/ plastic ones in future.

三峡水轮发电机采用了巴氏合金瓦今后还可能采用弹性金属塑料瓦推力轴承。

Baling and wrapping machine of maize is a typical mechatronics device. This device can convey the crush corn stalks and bale it with thread, then bag it with plastic film and be stored.

玉米秸秆打捆包膜机是一个典型的机电一体化设备，它能将粉碎的玉米秸秆进行收集、传送和打捆，最后用塑料薄膜包好贮藏起来。

It's this paper mend with a plastic cover and there's all these black magnetic particles here.

它是用这种纸以及一种塑料覆在上面，这里还有一些黑色磁性粒子。

Factors Affecting Strength Properties of Foamed Beads Light Soil and Laboratory Study

影响塑料发泡颗粒轻质土强度的因素及其试验研究

Strength and deformation properties of foamed beads light soil

发泡塑料颗粒轻质土的强度、变形特性研究

Tengai resembles a head on a stick, with a friendly looking face beamed onto a screen which wraps around his plastic skull.

腾艾就像一颗长在木棒上的头，他的塑料脑袋上有一块屏幕，屏幕上展现着一张友好的脸。

The Application of Engineering Plastics for High Efficiency Factory Farm

工程塑料在工厂化高效农业工程中的应用

The article introduces the application status, development and prospect of the engineering plastics in the high efficiency factory farm.

前言：介绍工程塑料在“工厂化高效农业工程”中的应用现状及发展前景。

The principle and characteristics of magnet injection molding are explained and its key technologies are analysed from magnetic particulate, plastic binder and mold, process.

并且在磁性颗粒塑料粘结剂、模具、工艺等方面分析了该工艺的关键技术。

Perfect Binding cover, book, of plastics, glued or sewn

无线胶订，胶粘装订塑料书套，粘合或装订

The main products are: food mixer, blender, electric fan, electric iron etc plastic accessories, fine hardware products.

本公司主要经营：生活小家电，食物搅拌器，榨汁机，电熨斗，应急灯，电风扇等塑料配件，精细五金制品。

In addition to environmental considerations such as the need to reduce both vermin and stench, the sheeting traps methane gas, allowing it to be collected by a network of well-heads and rubber tubing.

除了需要减少害虫和臭气等环境方面的考虑，塑料布还可防止沼气泄漏，使沼气可以通过井楼和橡胶管组成的网络收集在一起。

She puts a piece of plastic tubing in her mouth and starts siphoning gas from a huge metal drum

她把一根塑料管放进嘴里，开始从一个巨大的金属桶里吸气。

Advantage and disadvantage of design for coating line of PALADIN plastic fittings

帕拉丁塑料件涂装线设计的得失

Coating process flow and design idea of coating line of PALADIN plastic fittings applied in automobiles were introduced.

介绍了应用于帕拉丁汽车中的塑料配件的涂装工艺流程和涂装线的设计思路。

Bill: I bought paper plates and plastic utensils.

比尔：我买了纸盘子和塑料餐具。