屈服的例句大全

Fitting coefficients K were calculated by strength fitting calculation in Ashby formula, and the results are K0.75. ( 3) The energy-absorption characteristic of Al2O3k/ Al porous composites was studied.

计算了关于Ashby屈服强度公式中的拟合系数K，发现K0.75。（3）研究了Al2O3k/Al多孔复合材料能量吸收特性。

The yield strength is reduced by 10~ 20 MPa after natural ageing and it can be simulated by artificial ageing ( 100 ℃× 2h or 200 ℃× 1h).

自然时效后屈服强度下降10～20MPa，用人工时效可以模拟自然时效，工艺是100℃×2h或200℃×1h。

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

Although the stress level is below the yield strength, long-term exposure to the alternating stresses may make the platform suffer the suddenly fatigue damage.

虽然应力水平远低于材料的屈服强度，但是在长期的交变应力作用下，桩腿有可能产生突然性的疲劳破坏。

Speaking to her supporters, Clinton celebrated her lopsided win in Kentucky and promised that she will stay in the race. She said "This continues to be a tough fight, and I have fought it the only way I know how, with determination, by never giving up and never giving in."

克林顿参议员向支持者讲话，庆祝她在肯塔基获得的压倒性胜利，并承诺要继续竞选下去。克林顿说：“今后的竞争仍会艰难，我充满信心，以我所知的特有的方式竞选，不放弃，不屈服。”

Conventional yield stress, breaking stress and breaking extensibility of the blends with different proportions were also measured.

测定了共混物的屈服应力、断裂应力和断裂伸长率。

The results showed that tensile strength, tensile yield stress and tensile breaking stress were increased with the increase of bore distance;

结果表明，随筛板孔距的增加，其拉伸强度、拉伸屈服应力及拉伸断裂应力均提高；

The influence of thermal oxygen on the tensile yield stress, tensile breaking stress, impact strength, elongation at break, melt point and the heat of melting of PF Nylon 1212 is investigated.

通过热氧老化试验，考察了热氧对尼龙1212拉伸屈服应力、拉伸断裂应力、冲击强度、断裂伸长率、熔点、熔融热的影响。

Yielding analysis of the steel beam bottom flange has some influence on the deflection calculation of composite beams.

钢梁下翼缘屈服对组合梁挠度计算有一定影响。

If the stress is above yield point, the column will be destroyed due to compression stress.

时成立.应力在屈服点以上时,由于压缩应力, 柱子将会破坏.

Their approach simply bludgeons you into submission

他们的方法就是迫使你屈服。

Yield Prediction Method and Its Application in Seismic Design of Building Structure

建筑抗震设计的屈服判别法及其工程应用

Cracking load, yield load and ultimate load are obviously higher.

开裂荷载明显提高，屈服荷载和极限荷载均显著提高。

The results show that the cracking load, yielding load and destructive load of strengthen frame are improved.

结果表明，碳纤维布加固震后严重损伤混凝土框架结构，其开裂荷载、屈服荷载及极限荷载均有所提高。

The Analysis of Small Scale Yielding Stress Field in a Crack Body

裂纹体小范围屈服应力场的分析

Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.

泡孔尺寸不仅影响着材料的屈服强度和塑性模量等，还影响着材料的应变率敏感性。

It is investigated that the influence of Bauschinger Effect on yield strength of tube body by using four point bending test to simulate the tube making process at varying stress strain amplitudes.

采用X65钢板在四点弯曲加载条件下，模拟输油管制管过程中不同应变量下的应力&应变过程，研究包申格效应对输油管管体屈服强度的影响。

An Experimental Study of Superplastic Yield Criteria under Tension-torsional Combined Loading

超塑变形屈服准则的拉扭复合实验研究

Geometrical Properties of Two Yield Criteria for Powder Metallurgical Materials

粉末冶金材料两个屈服条件几何性质

Some relationships between the two yield criteria for powder metallurgical materials were revealed in detail.

揭示了粉末冶金材料2个常用屈服条件的相互关系。