屈服的例句大全

Stability Analysis of Composite Slope by Equivalent Area Circle Yield Criterion

用等面积圆屈服准则分析复合边坡的稳定问题

Speaking to her supporters, Clinton celebrated her lopsided win in Kentucky and promised that she will stay in the race. She said "This continues to be a tough fight, and I have fought it the only way I know how, with determination, by never giving up and never giving in."

克林顿参议员向支持者讲话，庆祝她在肯塔基获得的压倒性胜利，并承诺要继续竞选下去。克林顿说：“今后的竞争仍会艰难，我充满信心，以我所知的特有的方式竞选，不放弃，不屈服。”

Conventional yield stress, breaking stress and breaking extensibility of the blends with different proportions were also measured.

测定了共混物的屈服应力、断裂应力和断裂伸长率。

The results showed that tensile strength, tensile yield stress and tensile breaking stress were increased with the increase of bore distance;

结果表明，随筛板孔距的增加，其拉伸强度、拉伸屈服应力及拉伸断裂应力均提高；

China's disarmament decision is make out of its own will, rather than under any external pressure.

中国的才俊决策是由中国做出的, 不是屈服于任何人的压力而被迫作出的.

Yielding analysis of the steel beam bottom flange has some influence on the deflection calculation of composite beams.

钢梁下翼缘屈服对组合梁挠度计算有一定影响。

If the stress is above yield point, the column will be destroyed due to compression stress.

时成立.应力在屈服点以上时,由于压缩应力, 柱子将会破坏.

Their approach simply bludgeons you into submission

他们的方法就是迫使你屈服。

Yield Prediction Method and Its Application in Seismic Design of Building Structure

建筑抗震设计的屈服判别法及其工程应用

Cracking load, yield load and ultimate load are obviously higher.

开裂荷载明显提高，屈服荷载和极限荷载均显著提高。

The results show that the cracking load, yielding load and destructive load of strengthen frame are improved.

结果表明，碳纤维布加固震后严重损伤混凝土框架结构，其开裂荷载、屈服荷载及极限荷载均有所提高。

The Analysis of Small Scale Yielding Stress Field in a Crack Body

裂纹体小范围屈服应力场的分析

Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.

泡孔尺寸不仅影响着材料的屈服强度和塑性模量等，还影响着材料的应变率敏感性。

It is investigated that the influence of Bauschinger Effect on yield strength of tube body by using four point bending test to simulate the tube making process at varying stress strain amplitudes.

采用X65钢板在四点弯曲加载条件下，模拟输油管制管过程中不同应变量下的应力&应变过程，研究包申格效应对输油管管体屈服强度的影响。

An Experimental Study of Superplastic Yield Criteria under Tension-torsional Combined Loading

超塑变形屈服准则的拉扭复合实验研究

Geometrical Properties of Two Yield Criteria for Powder Metallurgical Materials

粉末冶金材料两个屈服条件几何性质

Some relationships between the two yield criteria for powder metallurgical materials were revealed in detail.

揭示了粉末冶金材料2个常用屈服条件的相互关系。

Various yield criteria are given to different elements for inelastic analysis.

进行弹塑性动力分析时对于各类不同的单元，提供了不同的屈服准则。

On the basis of the YAI ( yield approach index) concept and its phase complementary parameter ω called danger coefficient, which were proposed in the previous paper by the authors, the new concept, FAI, is introduced.

基于屈服接近度概念，将塑性区内塑性应变损伤评价与其结合，提出了破坏接近度（FAI）的新定义。

Analysis result shows: the stress on the part of transition from flange to shaft body is greater and more complex;

分析结果表明：在由法兰盘向轴身过渡的轴段应力较大，而且比较复杂，通过对比材料的屈服应力极限，还有较大的强度储备；